Related papers: Picosecond Ultrasonic Measurements Using an Optica…
Parametric coupling of optical and mechanical degrees of freedom forms the basis of many ultra-sensitive measurements of both force and mechanical displacement. An optical cavity with a mechanically compliant boundary enhances the…
The combination of microfluidic technology and optical fluids characterization techniques has been recently applied to produce lab-on-a-chip systems. In the present work, bringing together the imaging technique called photoacoustic imaging…
Optical tweezers equipped with position detection allow for application of piconewton-scale forces and high-temporal-resolution measurements of nanometer-scale motion. While typically used for trapping microscopic objects, the optical…
This paper introduces an improved image processing method usable in capacitive imaging applications. Standard capacitive imaging tends to prefer amplitude-based images over the use of phase due to better signal-to-noise ratios. The new…
Optical microcavities confine light to wavelength-scale volumes and are a key component for manipulating and enhancing the interaction of light, vacuum states, and matter. Current microcavities are constrained to a small number of spatial…
This review discusses picosecond ultrasonics experiments using ultrashort hard x-ray probe pulses to extract the transient strain response of laser-excited nanoscopic structures from Bragg-peak shifts. This method provides direct,…
High-gain and low-noise signal amplification is a valuable tool in various cryogenic microwave experiments. A microwave optomechanical device, in which a vibrating capacitor modulates the frequency of a microwave cavity, is one technique…
A two-dimensional photonic crystal semiconductor microcavity with a quality factor Q ~ 40,000 and a modal volume Veff ~ 0.9 cubic wavelengths is demonstrated. A micron-scale optical fiber taper is used as a means to probe both the spectral…
Ultrasound is an important imaging modality for biological systems. High-frequency ultrasound can also (e.g., via acoustical nonlinearities) be used to provide deeply penetrating and high-resolution imaging of vascular structure via…
Pulse area approach has been established as a versatile analytical tool for studying the resonant interaction between the light and the resonant atomic ensemble. In recent years photon and spin echoes in cavity assisted schemes become…
Measuring 3D geometric structures of indoor scenes requires dedicated depth sensors, which are not always available. Echo-based depth estimation has recently been studied as a promising alternative solution. All previous studies have…
We experimentally realized an optical nanofiber-based cavity by combining a 1-D photonic crystal and Bragg grating structures. The cavity morphology comprises a periodic, triplex air-cube introduced at the waist of the nanofiber. The cavity…
Exploring the dynamics of an optically levitated dielectric micro- and nanoparticle is an exciting new subject in quantum science. Recent years have witnessed rapid advancements in attaining quantum-limited optical detection and control of…
Cavities in large-scale photonic integrated circuits often suffer from a wider distribution of resonance frequencies due to fabrication errors. It is crucial to adjust the resonances of cavities using post-processing methods to minimize the…
Optical microcavities have received much attention over the last decade from different research fields ranging from fundamental issues of cavity QED to specific applications such as microlasers and bio-sensors. A major issue in the latter…
A small depression is created in a straight optical fiber taper to form a local probe suitable for studying closely spaced, planar microphotonic devices. The tension of the "dimpled" taper controls the probe-sample interaction length and…
Calibration sources are an indispensable tool for all detectors. In acoustic particle detection the goal of a calibration source is to mimic neutrino signatures as expected from hadronic cascades. A simple and promising method for the…
We propose a marginally stable optical resonator suitable for atom interferometry. The resonator geometry is based on two flat mirrors at the focal planes of a lens that produces the large beam waist required to coherently manipulate cold…
Photoacoustic(PA) imaging is a non-destructive and non-invasive technology for visualizing minute blood vessel structures in the body using ultrasonic sensors. In PA imaging, the image quality of a single-shot image is poor, and it is…
An analog crystal filter based cavity emulator is modified with reverse biased varactor diodes to provide a tuning range of around 160 Hz. The piezo drive voltage of the resonance controller is used to detune the cavity through the bias…