Related papers: Reduced leakage current in Josephson tunnel juncti…
Self-shunted aluminum Josephson junctions with high-transparency barriers were fabricated using the shadow-evaporation technique and measured at low temperatures, T=25 mK. Due to high junction transparency, the IV-characteristics were found…
Atomic layer deposition (ALD) provides a promising approach for deposition of ultrathin low-defect-density tunnel barriers, and it has been implemented in a high-vacuum magnetron sputtering system for in situ deposition of ALD-Al2O3 tunnel…
We tested oxidized titanium layers as barriers for hybrid Josephson junctions with high $I_cR_n$-products and for the preparation of junctions for tunneling spectroscopy. For that we firstly prepared junctions with conventional…
Superconducting qubits based on Al/AlOx/Al Josephson junction are one of the most promising candidates for the physical implementation of universal quantum computers. Due to scalability and compatibility with the state-of-the-art…
Josephson tunnel junctions form the basis for various superconducting electronic devices. For this reason, enormous efforts are routinely taken to establish and later on maintain a scalable and reproducible wafer-scale manufacturing process…
We have performed a detailed study of the time stability and reproducibility of sub-micron $Al/AlO_{x}/Al$ tunnel junctions, fabricated using standard double angle shadow evaporations. We have found that by aggressively cleaning the…
Josephson junctions were fabricated in epitaxial films of cobalt-doped BaFe2As2 on [001]-tilt (La,Sr)(Al,Ta)O3 bicrystal substrates. 10m-wide microbridges spanning a 30-degrees-tilted bicrystal grain boundary (BGB bridge) exhibited…
We present a fabrication scheme and testing results for epitaxial sub-micrometer Josephson junctions. The junctions are made using a high-temperature (1170 K) "via process" yielding junctions as small as 0.8 mu m in diameter by use of…
We present ferromagnetic Nb/Al2O3/Ni60Cu40/Nb Josephson junctions (SIFS) with an ultrathin Al2O3 tunnel barrier. The junction fabrication was optimized regarding junction insulation and homogeneity of current transport. Using…
The microscopic structure of ultra-thin oxide barriers often plays a major role in modern nano-electronic devices. In the case of superconducting electronic circuits, their operation depends on the electrical non-linearity provided by one…
Josephson tunnel junctions with the strong ferromagnetic alloy $\Fe_{0.75}\Co_{0.25}$ as the barrier material were studied. The junctions were prepared with high quality down to a thickness range of a few monolayers of Fe-Co. An oscillation…
Josephson junctions form the core circuit element in superconducting quantum computing circuits, single flux quantum digital logic circuits, and sensing devices such as SQUIDs. Aluminum oxide has typically been used as the tunnel barrier.…
The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlO$_x$ has long been regarded as the highest…
Approaches to developing large-scale superconducting quantum processors must cope with the numerous microscopic degrees of freedom that are ubiquitous in solid-state devices. State-of-the-art superconducting qubits employ aluminum oxide…
The effect of dc electrical stress and breakdown on Josephson and quasiparticle tunneling in Nb/Al/AlOx/Nb junctions with ultrathin AlOx barriers typical for applications in superconductor digital electronics has been investigated. The…
A minimal method to fabricate Al/AlO$_x$/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 $\mu$m$^2$ can be fabricated and, with…
We show that less than 10% of the barrier area dominates the electron tunneling in state-of-art Al/AlOx/Al Josephson junctions. They have been studied by transmission electron microscopy, specifically using atomic resolution annular dark…
Nb/Al_2O_3/Ni_{0.6}Cu_{0.4}/Nb based superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson tunnel junctions with a thickness step in the metallic ferromagnetic \Ni_{0.6}\Cu_{0.4} interlayer were fabricated. The step was…
We investigate the current-voltage characteristics of high-transparency superconductor-insulator-normal metal (SIN) junctions with the specific tunnel resistance below 30 kOhm per square micron. The junctions were fabricated from different…
We report the realization of multilayer three-dimensional nanobridge Josephson junctions based on Nb/NbN and Nb/TiN superconducting stacks fabricated using electron-beam lithography and chlorine-based dry etching. In this architecture, a…