Related papers: Defect-free ZnSe nanowire and nano-needle nanostru…
Mn-doped GaAs thin films were grown at a high substrate temperature of 580 C. During the growth process, the Mn cell temperature was ramped at different rates, resulting in a variety of different Mn concentration depth profile slopes, as…
We demonstrate an all-epitaxial and scalable growth approach to fabricate single-crystalline GaN nanowires on graphene by plasma-assisted molecular beam epitaxy. As substrate, we explore several types of epitaxial graphene layer structures…
On-surface synthesis has recently emerged as an effective route towards the atomically precise fabrication of graphene nanoribbons of controlled topologies and widths. However, whether and to which degree structural disorder occurs in the…
Controlling the properties of semiconductor/metal interfaces is a powerful method for designing functionality and improving the performance of electrical devices. Recently semiconductor/superconductor hybrids have appeared as an important…
Controlling the growth of zinc oxide nanowires is necessary to optimize the performances of nanowire-based devices such as photovoltaic solar cells, nano-generators, or light-emitting diodes. In this view, we investigate the nucleation and…
Ionic layer epitaxy (ILE) has recently been developed as an effective strategy to synthesize nanometer-thick 2D materials with a non-layered crystal structure, such as ZnO. The packing density of the amphiphilic monolayer is believed to be…
Advances in quantum technology may come from the discovery of new materials systems that improve the performance or allow for new functionality in electronic devices. Lead telluride (PbTe) is a member of the group IV-VI materials family…
Molecular beam epitaxy (MBE) is a state-of-the-art technique for depositing thin films with precise stoichiometric control. However, when depositing oxides of perovskite-type ABO3, this process becomes challenging as controlling the flux…
GaAs:Mn nanowires were obtained on GaAs(001) and GaAs(111)B substrates by molecular beam epitaxial growth of (Ga,Mn)As at conditions leading to MnAs phase separation. Their density is proportional to the density of catalyzing MnAs…
We have synthesized Fe$_{1+y}$Te thin films by means of molecular beam epitaxy (MBE) under Te-limited growth conditions. We found that epitaxial layer-by-layer growth is possible for a wide range of excess Fe values, wider than expected…
Incorporation of Bi into GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires grown by molecular beam epitaxy is studied with transmission electron microscopy. Nanowires are grown on GaAs(111)B substrates with Au-droplet assisted mode. Bi-doped…
Here we report on non-uniform shell growth of In(x)Ga(1-x)As onto GaAs nanowire (NW) core by molecular beam epitaxy (MBE). The growth was realized on pre-patterned silicon substrates with pitch size (p) ranging from 0.1 um to 10 um.…
A procedure to achieve the density-controlled growth of gold-catalyzed InP nanowires (NWs) on (111) silicon substrates using the vapor-liquid-solid method by molecular beam epitaxy is reported. We develop an effective and mask-free method…
We investigate the influence of step edge diffusion (SED) and desorption on Molecular Beam Epitaxy (MBE) using kinetic Monte-Carlo simulations of the solid-on-solid (SOS) model. Based on these investigations we propose two strategies to…
Magnetite thin fims have been grown epitaxially on ZnO and MgO substrates using molecular beam epitaxy. The film quality was found to be strongly dependent on the oxygen partial pressure during growth. Structural, electronic, and magnetic…
We demonstrate Au-assisted vapor-solid-solid (VSS) growth of Ge nanowires (NWs) by molecular beam epitaxy (MBE) at 220 {\deg}C, which is compatible with the temperature window for Si-based integrated circuit. Low temperature grown Ge NWs…
Antiperovskites, or inverse perovskites, have recently emerged as a material class with a plethora of promising electronic properties. This perspective describes the molecular beam epitaxy (MBE) growth of oxide antiperovskites Sr$_3$PbO and…
We report a new biphasic crystalline wurtzite/zinc-blende homostructure in gallium nitride nanowires. Cathodoluminescence was used to quantitatively measure the wurtzite and zinc-blende band gaps. High resolution transmission electron…
A method of growing mushroom or shell like nanostructured metal convex concave models has been worked out. Silver,copper,nickel,rhodium and Pd-Ni,Pd-Co alloy structures are reproduced as a result of self-assembly of nanowires growing on…
Tin telluride (SnTe) is an IV-VI semiconductor with a topological crystalline insulator band structure, high thermoelectric performance, and in-plane ferroelectricity. Despite its many applications, there has been little work focused on…