Related papers: Portable Valve-less Peristaltic Micro-pump Design …
This paper details the development of an integrated AC electro-osmotic (ACEO) microfluidic pump for dilute electrolytes consisting of a long serpentine microchannel lined with three dimensional (3D) stepped electrode arrays. Using low AC…
A blood turbine-pump system (iATVA), resembling a turbocharger was proposed as a mechanical right-heart assist device without external drive power. In this study, the iATVA system is investigated with particular emphasis on the blood…
A simple analytical model of a layered system comprised of a single passage of a serpentine flow channel and a parallel underlying porous electrode (or porous layer) is proposed. This analytical model is derived from Navier-Stokes motion in…
Micro/nanoporous membranes have been used extensively in biological and medical applications associated with filtration, particle sorting, cell separation, and real-time sensing. Expanding its applications to microfluidics offers several…
A novel scheme for tunable optofluidic optical coupler is proposed, by using directional coupling waveguide structure and microfluidic channel with two tapers at end points. The normalized optical power at two output ports can be…
The Cellular Potts Model (CPM) succesfully simulates drainage and shear in foams. Here we use the CPM to investigate instabilities due to the flow of a single large bubble in a dry, monodisperse two-dimensional flowing foam. As in…
Ceramics based piezoelectric generators are known for their high energy density and poor flexibility. In this work, v_r-PMN-0.3PT/PDMS 2-2 composite with optimum PMN-0.3PT content (v_r) was designed that demonstrated enhanced output energy…
Nearly homogeneous and isotropic, highly turbulent flow, generated by an original multi-scale injector is experimentally studied. This multi-scale injector is made of three perforated plates shifted in space such that the diameter of their…
The liquid flow and conjugated heat transfer performance of single-phase laminar flow in rectangular microchannels equipped with longitudinal vortex generators (LVGs) are numerically investigated. Deionized-water with temperature-dependent…
We describe a compact ultra-high vacuum (UHV) scanning tunneling microscope (STM) system that does not need any external supply of cooling liquids. It achieves temperatures down to 1.5 K and a z-noise down to 300 fmRMS for the frequency…
A simulation of an atomic force microscope operating in the constant amplitude dynamic mode is described. The implementation mimics the electronics of a real setup including a digital phase-locked loop (PLL). The PLL is not only used as a…
We have designed and prototyped the process steps for the batch production of large-area micro-channel-plate photomultipliers (MCP-PMT) using the "air-transfer" assembly process developed with single $LAPPD^{\text{TM}}$ modules. Results are…
A magnetic field rotating on the free surface of a ferrofluid layer is shown to induce considerable fluid motion toward the direction the field is rolling. The measured flow velocity i) increases with the square of the magnetic field…
The tendency for flows in microfluidic systems to behave linearly poses a challenge for designing integrated flow control schemes to carry out complex fluid processing tasks. This hindrance has led to the use of numerous external control…
This paper presents the work devoted to the study of the operation of a miniaturized membrane Stirling engine. Indeed, such an engine relies on the dynamic coupling of the motion of two membranes to achieve a prime mover Stirling…
The elasticity of PDMS has played a central role in advancing important microfluidic technologies, ranging from early valves to sophisticated organ-on-a-chip systems. However, most deformable microfluidic devices are based on geometries…
We demonstrate the design, fabrication and use of a dual electrode PMUT (Piezoelectric Micromachined Ultrasound Transducer) integrated with a microfluidic channel as a fluid density sensor in both static and dynamic density-change…
Particle accelerators that use electromagnetic fields to increase a charged particle's energy have greatly advanced the development of science and industry since invention. However, the enormous cost and size of conventional radio-frequency…
When swimming at low Reynolds numbers, inertial effects are negligible and reciprocal movements cannot induce net motion. Instead, symmetry breaking is necessary to achieve net propulsion. Directed swimming can be supported by magnetic…
We study the linearized hydrodynamics of a two-component fluid membrane near a repulsive wall, via a model which incorporates curvature- concentration coupling as well as hydrodynamic interactions. This model is a simplified version of a…