Related papers: Portable Valve-less Peristaltic Micro-pump Design …
We fabricate a microscale electromechanical system, in which a suspended superconducting membrane, treated as a mechanical oscillator, capacitively couples to a superconducting microwave resonator. As the microwave driving power increases,…
The flow structure obtained when Localized Arc Filament Plasma Actuators (LAFPA) are employed to control the flow issuing from a perfectly expanded Mach 1.3 nozzle is elucidated by visualizing coherent structures obtained from Implicit…
In this work we formulate and test a new procedure, the Multiscale Perturbation Method for Two-Phase Flows (MPM-2P), for the fast, accurate and naturally parallelizable numerical solution of two-phase, incompressible, immiscible…
High temperature superconducting (HTS) dynamos are promising devices that can inject large DC currents into the winding of superconducting machines or magnets in a contactless way. Thanks to this, troublesome brushes in HTS machines or…
A new compact active turbulence generator is developed, tested, and characterized, which extends the capabilities of such generators used in turbulent premixed combustion research. The generator is composed of two blades that resemble the…
Microfluidics, the study of fluids in microscopic channels, has led to important advances in fields as diverse as microelectronics, biotechnology and chemistry. Microfluidic research is primarily based on the use of microfluidic chips,…
Ultrafiltration membrane modules suffer from a permeate flow decrease arising during filtration and caused by concentration polarization and fouling in, e.g., fermentation broth purification. Such performance losses are frequently mitigated…
Due to scaling laws, in microfluidic, flows are laminar. Consequently, mixing between two liquids is mainly obtained by natural diffusion which may take a long time or equivalently requires centimetre length channels. To reduce time and…
This paper presents the mechatronic design, dynamic modeling, and experimental validation of a three-degree-of-freedom (3-DOF) micro parallel robot featuring a prismatic-spherical (3PS) topology actuated by three Hydraulically Amplified…
In this work we present, for the first time, a computational fluid dynamics tool for the simulation of the metered discharge in a pressurized metered dose inhaler. The model, based on open-source software, adopts the Volume-Of-Fluid method…
We have developed a modular system for high-resolution microscopy at high hydrostatic pressure. The system consists of a pressurised cell of volume ~100 microlitres, a temperature controlled holder, a ram and a piston. We have made each of…
Directional and self-propelled flow in open channels has a variety of applications, including microfluidic and medical devices, industrial filtration processes, fog-harvesting and condensing apparatuses. Here, we present versatile…
Around the third week after gestation in embryonic development, the human heart consists only of a valvless tube, unlike a fully developed adult heart, which is multi-chambered. At this stage in development, the heart valves have not formed…
The objective of this work is to optimize the performance of a constant flow parallel mechanical displacement micropump, which has parallel pump chambers and incorporates passive check valves. The critical task is to minimize the pressure…
Microsystems become part of everyday life but their application is restricted by lack of strong and fast motors (actuators) converting energy into motion. For example, widespread internal combustion engines cannot be scaled down because…
This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a…
The need for rapid fabrication of microfluidic devices has become increasingly critical as microfluidics become part of biomedical sensors. Using Warp and Weft Wiring (WWW) of copper wires, this paper presents a novel low-cost method for…
We study compressible fluid flow in narrow two-dimensional channels using a novel molecular dynamics simulation method. In the simulation area, an upstream source is maintained at constant density and temperature while a downstream…
In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost…
Heat exchangers incorporating triply periodic minimal surface (TPMS) lattice structures have attracted considerable research interest because they promote uniform flow distribution, disrupt boundary layers, and improve convective…