Related papers: Large Area Roller Embossing of Multilayered Cerami…
Artificially designed composite materials consist of microstructures, that exhibit various thermal properties depending on their shapes, such as anisotropic thermal conductivity. One of the representative applications of such composite…
In 2008, a triple GEM detector prototype with an area of ~2000 cm2 has been constructed, based on foils of 66*66 cm. GEMs of such dimensions had not been made before, and innovations to the existing technology were introduced to build this…
Hot-rolling is a metal forming process that produces a workpiece with a desired target cross-section from an input workpiece through a sequence of plastic deformations; each deformation is generated by a stand composed of opposing rolls…
Nanostructuring materials at small scales enables control over their physical properties, revealing behaviors not observed at larger dimensions. This strategy is particularly effective in two-dimensional (2D) materials, where surface…
In this work we develop a simple equivalent circuit model (ECM) that predicts the spectral response of a lumped-element loaded single patterned layer reflective metasurface. The proposed ECM maintains accuracy across varying design…
A modified electron beam induced deposition method using a parallel beam of electrons is developed. The method relies on the build-up of surface potential on an insulating surface exposed to an electron beam. Presence of sharp edges on the…
In this article we discuss in detail the effective approaches to enhance the thermal conductivity in polymer composites. It is shown from numerical simulations that maximizing interfacial area between filler and polymer enhances very…
Given the hyper-spectral imaging unique potentials in grasping the polymer characteristics of different materials, it is commonly used in sorting procedures. In a practical plastic sorting scenario, multiple plastic flakes may overlap which…
In the present investigation, a strongly bonded strip of an aluminium-magnesium based alloy AA5086 is successfully produced through accumulative roll bonding (ARB). A maximum of up to eight passes has been used for the purpose.…
Polymer composite materials require softening to reduce their glass transition temperature and improve processability. To this end, plasticizers, which are small organic molecules, are added to the polymer matrix. The miscibility of these…
Enhancement of thermal performance of concrete wall is nowadays of great importance in reducing the operational energy demand of buildings. We developed a new kind of inorganic coating material based on \ce{SiO2}-\ce{Al2O3}-rich minerals…
This paper describes the automation of a laser heating arrangement for synthesizing and studying materials at high pressures (up to ~ 1 Mbar) and high temperatures (up to ~ 5000 K). In this arrangement, a diamond anvil high-pressure cell…
We introduce a new style of multileaf collimator which employs rotors with angularly dependent radius to control the masking aperture: a rotor-based multileaf collimator (RMLC). Using a padlock-inspired mechanism, a single motor can set…
In this study, we successfully developed two-dimensional paper-based analytical devices using a hybrid technique of injection molding and embossing. This innovative approach involves passive or active delivery of molten wax onto a glass…
In this work we show that macroscopic experiments can be used to investigate microscopic systems. Such macroscopic experiments enable testing the assumptions and results obtained by theoretical considerations or simulations that can not be…
In order to increase the bone forming ability of MBG-PCL composite scaffold, microporosity was created in the struts of 3D-printed MBG-PCL scaffolds for the manufacturing of a construct with a multiscale porosity consisting of meso-, micro-…
For most finite element simulations, boundary-conforming meshes have significant advantages in terms of accuracy or efficiency. This is particularly true for complex domains. However, with increased complexity of the domain, generating a…
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic…
Spinning of a common aluminum automotive casting alloy A356 (Al-7Si-0.3 Mg) at elevated temperatures has been investigated experimentally with a novel industrial-scale apparatus. This has permitted the implementation of a fully coupled…
Self-positioned nanomembranes such as rolled-up tubes and wrinkled thin films have been potential systems for a variety of applications and basic studies on elastic properties of nanometer-thick systems. Although there is a clear driving…