Related papers: A Simple Method for Rise-Time Discrimination of Sl…
In this paper the PreAmplifier ShAper (PASA) for the Time Projection Chamber (TPC) of the ALICE experiment at LHC is presented. The ALICE TPC PASA is an ASIC that integrates 16 identical channels, each consisting of Charge Sensitive…
The non-destructive readout capability of the Skipper Charge Coupled Device (CCD) has been demonstrated to reduce the noise limitation of conventional silicon devices to levels that allow single-photon or single-electron counting. The noise…
Time-resolved studies have so far relied on rapidly triggering a photo-induced dynamic in chemical or biological ions or molecules and subsequently probing them with a beam of fast moving photons or electrons that crosses the studied…
Using the Five-hundred-meter Aperture Spherical radio Telescope (FAST), we have recorded 10^5 single pulses from PSR J1022+1001. We studied the polarization properties, their energy distribution and their times of arrival. This is only…
We report on an electrical detection method of ultrasensitive carbon nanotube mechanical resonators. The noise floor of the detection method is reduced using a RLC resonator and an amplifier based on a high electron mobility transistor…
The measurement error of pulse times of arrival (TOAs) in the high S/N limit is dominated by the quasi-random variation of a pulsar's emission profile from rotation to rotation. Like measurement noise, this noise is only reduced as the…
Inspired by Wilkinson ADC method, we implement a fast linear discharge method based on FPGA to digitize nuclear pulse signal. In this scheme, we use a constant current source to discharge the charge on capacitor which is integrated by the…
Timing-pick up detectors with excellent timing resolutions are essential in many modern nuclear physics experiments. Aiming to develop a Time-Of-Flight system with precision down to about 10 ps, we have made a systematic study of the timing…
Single-cell prototype drift chambers were built at TRIUMF and tested with a $\sim\unit[210]{MeV/c}$ beam of positrons, muons, and pions. A cluster-counting technique is implemented which improves the ability to distinguish muons and pions…
We present radio observation of a millisecond pulsar PSR J0621+1002 using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The pulsar shows periodic pulse intensity modulations for both the first and the third pulse…
We present a robust approach to incorporating models for the time-variable broadening of the pulse profile due to scattering in the ionized interstellar medium into profile-domain pulsar timing analysis. We use this approach to…
The prospect of pileup induced backgrounds at the High Luminosity LHC (HL-LHC) has stimulated intense interest in technology for charged particle timing at high rates. In contrast to the role of timing for particle identification, which has…
A new approach was developed for the design of front-end circuits for semiconductor radiation detectors. The readout scheme consists of a first stage made of only a few components located close to the detector, and of a remote second stage…
Time and charge measurements over a large dynamic range from 1 Photo Electron (P.E.) to 4000 P.E. are required for the Water Cherenkov Detector Array (WCDA), which is one of the key components in the Large High Altitude Air Shower…
A new method for determining plasma parameters from beam current transients resulting from short pulse 1+ injection into a Charge Breeder Electron Cyclotron Resonance Ion Source (CB-ECRIS) has been developed. The proposed method relies on…
The ALICE experiment at the LHC measures properties of the strongly interacting matter formed in ultrarelativistic heavy-ion collisions. Such studies require accurate particle identification (PID). ALICE provides PID information via several…
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point,…
Traditional pulsar timing techniques involve averaging large numbers of single pulses to obtain a high signal-to-noise (S/N) profile, which is matched to a template to measure a time of arrival (TOA). However, the morphology of individual…
A light emitting diode (LED) pulser has been developed that can be used for tests or calibration of timing and amplitude sensitivity of particle physics detectors. A comparative study is performed on the components and pulser output…
To promote the development of two-dimensional (2D) photonic crystals (PCs) based refractive-index (RI) biosensors, there is an urgent requirement of an effective approach to improve the RI sensitivity of 2D PCs (usually less than 500…