Related papers: Concave Microlens Array Mold Fabrication in Photor…
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant…
Microscope objectives achieve near diffraction-limited performance only when used under the conditions they are designed for. In non-standard geometries, such as thick cover slips or curved surfaces, severe aberrations arise, inevitably…
The microlens is a key enabling technology in optoelectronics, permitting light to be efficiently coupled to and from devices such as image sensors and light-emitting diodes. Their ubiquitous nature motivates the development of new…
Developing a suitable production method for three-dimensional periodic nanostructures with high aspect ratios is a subject of growing interest. For mass production, Talbot lithography offers many advantages. However, one disadvantage is…
This article presents a new and individual way to generate opto-mechanical components by Additive Manufacturing, embedded in an established process chain for the fabrication of metal optics. The freedom of design offered by additive…
A new method of introducing nanopores with spongy morphology during fabrication of size and pitch controlled flexible silicon microwires (SiMWs) in wafer scale is presented using nanosphere lithography technique in addition to metal…
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the…
We experimentally demonstrate ultrathin flat lenses with a thickness of 7 {\AA}, which corresponds to the fundamental physical limit of the thickness of the material, is fabricated in a large area, monolayer, CVD-prepared tungsten…
Achieving high-precision light manipulation is crucial for delivering information through complex media with high fidelity. However, existing spatial light modulation devices face a fundamental tradeoff between speed and accuracy. Digital…
We report subwavelength-thick, polarization insensitive micro-lenses operating at telecom wavelength with focal spots as small as 0.57 wavelengths and measured focusing efficiency up to 82%. The lens design is based on high contrast…
In this study, we present a complex investigation for miniaturizing of perovskite photodiodes (PPDs) in various geometries with use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we successfully…
We propose a near-infrared super resolution imaging system without a lens or a mirror but with an array of metallic nanoshell particle chain. The imaging array can plasmonically transfer the near-field components of dipole sources in the…
We explore the ultrahigh-vacuum (UHV) compatibility of Formlabs `Clear Resin' via vat photopolymerization (VPP). We report on a method for using VPP additive manufacturing, specifically Formlabs' widely available stereolithographic (SLA)…
Security labels combining facile structural color readout and physically unclonable one-way function (PUF) approach provide promising strategy for fighting against forgery of marketable products. Here, we justify direct femtosecond-laser…
The structure of random micro lens array (rMLA) breaks the periodicity of micro lens array (MLA), suppressing coherence in the homogenization process, thereby achieving better spot homogenization effects. Sol-gel rMLA exhibits strong…
In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building…
We present results of a planar process development based on the combination of electron-beam lithography and dry etching for fabricating high-quality superconducting photosensitive structures in the sub-100nm regime. The devices were…
In this paper we present a passive and cost-effective method for increasing the frequency range of ultrasound MEMS microphone arrays when using beamforming techniques. By applying a 3D-printed construction that reduces the acoustic aperture…
We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The…
The past decade has seen a significant growth in research targeted at space based observatories for imaging exo-solar planets. The challenge is in designing an imaging system for high-contrast. Even with a perfect coronagraph that modifies…