Related papers: Concave Microlens Array Mold Fabrication in Photor…
Additive manufacturing (AM; 3D printing) has clear benefits in the production of lightweight mirrors for astronomy: it can create optimised lightweight structures and combine multiple components into one. New capabilities in AM ceramics,…
We present a lithographic method for fabricating free-standing microparticles directly from SUEX dry-film epoxy resist. Unlike conventional SU-8 particle fabrication, which requires patterning on solid substrates followed by…
We have fabricated a layered nano-composite by alternating metal and gain medium layers, the gain dielectric consisting of a polymer incorporating optically pumped dye molecules. Exploiting an improved version of the effective medium…
We present a 3D-printing-based design to produce wire-guided liquid microfilms that can be used for versatile spectroscopic applications. We demonstrate the ability of our instrument to provide optically useful liquid microfilms with highly…
Infrared (IR) detectors are widely used due to their ability to sense thermal radiation. Recently, a room-temperature infrared detector known as the spintronic Poisson bolometer was introduced. While offering fast digital readout, its…
Infrared optical photonic crystals fabricated using direct laser writing, which is based on the two-photon polymerization of suitable monomers, have received substantial interest since the emergence of this process. Two-photon…
We present the fabrication of exceptionally small-radius concave microoptics on fused silica substrates using CO2 laser ablation and subsequent reactive ion etching. The protocol yields on-axis near-Gaussian depressions with radius of…
The ultimate feature size is key in ultrafast laser material processing. A capacity to signiicantly exceed optical limits and to structure below 100nm is essential to advance ultrafast processing into the field of metamaterials. Such…
Extreme ultraviolet (EUV) lithography is the cornerstone of the fabrication of advanced integrated circuits at the 7-nm node and beyond, but its reliance on multi-element reflective projection optics makes it inaccessible for small-scale…
Flat lenses enable thinner, lighter, and simpler imaging systems. However, large-area and high-NA flat lenses have been elusive due to computational and fabrication challenges. Here, we applied inverse design to create a multi-level…
In the past years, EUV lithography scanner systems have entered High-Volume Manufacturing for state-of-the-art Integrated Circuits (IC), with critical dimensions down to 10 nm. This technology uses 13.5 nm EUV radiation, which is shaped and…
New experiments that target the B-mode polarization signals in the Cosmic Microwave Background require more sensitivity, more detectors, and thus larger-aperture millimeter-wavelength telescopes, than previous experiments. These larger…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Following the recent developement of Fourier ptychographic microscopy (FPM) in the visible range by Zheng et al. (2013), we propose an adaptation for hard x-rays. FPM employs ptychographic reconstruction to merge a series of low-resolution,…
This paper describes the novel use of low-cost, 5-axis, multi-material additive manufacturing to fabricate functional, complex conformal antennas. Using a customised open source 5-axis desktop printer incorporating conductive filaments,…
The correction of the aberration of transcranial focused ultrasounds is a relevant issue for enhancing various non-invasive medical treatments. Emission through multi-element phased arrays has been the most widely accepted method to reduce…
We have demonstrated the fabrication and characterization of 2D liquid-based multimode optical waveguide structures over a Polydimethylsiloxane (PDMS) material-based chip. Fabrication of two separate microstructures, one with a width of 14…
Micron-scale optical cavities are produced using a combination of template sphere self-assembly and electrochemical growth. Transmission measurements of the tunable microcavities show sharp resonant modes with a Q-factor>300, and 25-fold…
We propose to use high numerical aperture single mode optical fibers like photonic crystal fiber for lensless in-line holographic microscopy. Highly divergent beam helps to overcome the spatial sampling limitation of the image sensor. In…
Volumetric lithography offers a path to scalable fabrication of complex three-dimensional (3D) micro- and nanoscale architectures, yet existing approaches are limited by quasi-two-dimensional exposure physics or slow serial writing. We…