Related papers: Harnessing bifurcations in tapping-mode atomic for…
Direct time-varying tip-sample force measurements by torsional harmonic cantilevers facilitate detailed investigations of the cantilever dynamics in tapping-mode atomic force microscopy. Here we report experimental evidence that the…
Tapping mode atomic force microscopy is a standard technique for inspection and analysis at the nanometer scale. The understanding of the non-linear dynamics of the system due to the tip sample interaction is an important prerequisite for a…
The quantitative interatomic force measurements open a new pathway to materials characterization, surface science, and chemistry by elucidating the force between 'two' interacting atoms as a function of their separation. Atomic force…
The Transient Fluctuation Theorem is used to calibrate an Atomic Force Microscope by measuring the fluctuations of the work performed by a time dependent force applied between a collo{\"i}dal probe and the surface. From this measure one can…
The atomic force microscope (AFM) is a versatile, high-resolution tool used to characterize the topography and material properties of a large variety of specimens at nano-scale. The interaction of the micro-cantilever tip with the specimen…
Quantifying the tip-sample interaction at the nanoscale in Amplitude Modulation mode AFM is challenging, especially when measuring in liquids. Here, we derive formulas for the tip-sample conservative and dissipative interactions and…
Tapping mode atomic force microscopy (AFM), also known as amplitude modulated (AM) or AC mode, is a proven, reliable and gentle imaging mode with widespread applications. Over the several decades that tapping mode has been in use,…
A new method is introduced for calibrating lateral force as measured by an atomic force microscope (AFM), making use of both an interferometric detector and an optical beam detector on the same instrument. The method may be implemented…
Non-invasive thermal noise calibration of both torsional and flexural eigenmodes is performed on numerous cantilevers of 10 different types. We show that for all tipless and short-tipped cantilevers, the ratio of torsional to flexural mode…
Determining sensor parameters is a prerequisite for quantitative force measurement. Here we report a direct, high-precision calibration method for quartz tuning fork(TF) sensors that are popular in the feld of nanomechanical measurement. In…
The separation of physical forces acting on the tip of a magnetic force microscope (MFM) is essential for correct magnetic imaging. Electrostatic forces can be modulated by varying the tip-sample potential and minimized to map the local…
Various methods of force measurement with the Atomic Force Microscope (AFM) are compared for their ability to accurately determine the tip-surface force from analysis of the nonlinear cantilever motion. It is explained how intermodulation,…
We present a new approach to tuning fork-based atomic force microscopy for utilizing advanced "tip-on-chip" probes with high sensitivity and broad compatibility. Usually, such chip-like probes with a size reaching 2 mm x 2 mm drastically…
A method to precisely calibrate the oscillation amplitude in Dynamic Scanning Force Microscopy is described. It is experimentally shown that a typical electronics used to process the dynamic motion of the cantilever can be adjusted to…
Interatomic-force measurements are regularly performed using frequency-modulation atomic force microscopy. This requires conversion of the observed shift in the resonant frequency of a force-sensing cantilever, to the actual force…
Colloidal probes are often used in force microscopy when the geometry of the tip-sample interaction should be well controlled. Their calibration requires the understanding of their mechanical response, which is very sensitive to the details…
Atomic force microscopy is an important tool for characterizing surface acoustic waves, in particular for high frequencies, where the wavelength is too short to be resolved by laser interferometry. A caveat is, that the cantilever…
A method is presented for calibrating the higher eigenmodes (resonance modes) of atomic force microscopy cantilevers that can be performed prior to any tip-sample interaction. The method leverages recent efforts in accurately calibrating…
A method for the separation and quantitative characterization of the electrostatic and Van der Waals contribution to tip-sample interaction in non-contact Scanning Force Microscopy is presented. It is based on the simultaneous measurement…
Atomic force microscopy (AFM) is widely used to measure surface topography of solid, soft, and living matter at the nanoscale. Moreover, by mapping forces as a function of distance to the surface, AFM can provide a wealth of information…