Related papers: Dual-Frequency Resonance-Tracking Atomic Force Mic…
Tapping mode atomic force microscopy is a standard technique for inspection and analysis at the nanometer scale. The understanding of the non-linear dynamics of the system due to the tip sample interaction is an important prerequisite for a…
To achieve quantitative interpretation of Piezoresponse Force Microscopy (PFM), including resolution limits, tip bias- and strain-induced phenomena and spectroscopy, analytical representations for tip-induced electroelastic fields inside…
We demonstrate the measurement of laterally induced optical forces using an Atomic Force Microscope (AFM). The lateral electric field distribution between a gold coated AFM probe and a nano-aperture in a gold film is mapped by measuring the…
Nanomechanical resonators can serve as high performance detectors and have potential to be widely used in the industry for a variety of applications. Most nanomechanical sensing applications rely on detecting changes of resonance frequency.…
We consider an oscillator model to describe qualitatively friction force for an atomic force mi-croscope (AFM) tip driven on a surface described by periodic potential. It is shown that average value of the friction force could be controlled…
A simple strobe setup with potential to study higher-order eigenmodes and multifrequency oscillations in micromechanical resonators is described. It requires standard equipment, commonly found in many laboratories, and it can thus be…
Coupled electromechanical resonators that can be independently driven/detected and easily integrated with external circuits are essential for exploring mechanical modes based signal processing. Here, we present a room temperature…
We demonstrate a technique that enables ferromagnetic resonance (FMR) measurements of the normal modes for magnetic excitations in individual nanoscale ferromagnets, smaller in volume by a factor of 1000 than can be probed by other methods.…
Study of interaction between high absorption matter and microwave radiated energy is a subject of great importance. Especially, this concerns microwave spectroscopic characterization of biological liquids. Use of effective testing methods…
Magnetic Resonance Force Microscopy (MRFM) describes a range of approaches to detect nuclear spins with mechanical sensors. MRFM has the potential to enable magnetic resonance imaging (MRI) with near-atomic spatial resolution, opening up…
Aligning a microcantilever to an area of interest on a sample is a critical step in many scanning probe microscopy experiments, particularly those carried out on devices and rare, precious samples. We report a series of protocols that…
Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the mechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to…
In optical detection setups to measure the deflection of micro-cantilevers, part of the sensing light is absorbed, heating the mechanical probe. We present experimental evidences of a frequency shift of the resonant modes of a cantilever…
Quartz tuning fork-based atomic force microscopy (QTF-AFM) has become a powerful tool for high-resolution imaging of both conductive and insulating samples, including semiconductor structures and metal-coated surfaces as well as soft matter…
Using finite element micromagnetic simulations, we study how resonant magnetisation dynamics in thin magnetic discs with perpendicular anisotropy are influenced by magnetostatic coupling to a magnetic nanoparticle. We identify resonant…
The torsional vibration of atomic force microscope (AFM) cantilevers is critical for high-sensitivity measurements, yet existing models for width-varying cantilevers often rely on approximations that lead to significant discrepancies with…
Optical tracking was used to characterize acoustic radiation force (ARF) induced displacements in a tissue-mimicking phantom. Amplitude modulated (AM) 3.3 MHz ultrasound was used to induce ARF in the phantom which was embedded with 10…
The dynamics of micro-resonators (or any mechanical resonators) can be studied by two complementary methods allowing the measurements in two different domains: (i) in the frequency domain - by the frequency sweeps using cw-excitation, and…
Magneto-acoustic tomography combines near-field radio-frequency (RF) and ultrasound with the aim of creating a safe, high resolution, high contrast hybrid imaging technique. We present continuous-wave magneto-acoustic imaging techniques,…
We demonstrate an alternative to Kelvin Probe Force Microscopy for imaging surface potential. The open-loop, single-pass technique applies a low-frequency AC voltage to the atomic force microscopy tip while driving the cantilever near its…