Related papers: Laser ablation loading of a surface-electrode ion …
Beam loading is the phenomenon which limits the charge and the beam quality in plasma based accelerators. An experimental study conducted with a laser-plasma accelerator is presented. Beam loading manifests itself through the decrease of…
The optical cycle-averaged ionization rate of Ar, O$_{2}$, and N$_{2}$ vs. local instantaneous laser intensity $I$ for linear polarized $800$ nm light is determined up to approx. $300$ TW/cm$^{2}$ by numerically inverting published…
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather…
Theoretical study of heavy ion acceleration from ultrathin (<200 nm) gold foils irradiated by a short pulse laser is presented. Using two dimensional particle-in-cell simulations the time history of the laser bullet is examined in order to…
Emission at 4.6 um was observed from an N2O filled hollow core fiber laser. 8-ns pump pulses at 1.517 um excited a vibrational overtone resulting in lasing on an R and P branch fundamental transition from the upper pump state. At optimum…
An all-optical, near-resonant laser atom trap is used to prepare an electronically excited and polarized gas target at mK-temperature for complete photo-ionization studies. As a proof-of-principal experiment, lithium atoms in the…
We describe an ex-situ surface-cleaning procedure that is shown to reduce motional heating from ion-trap electrodes. This precleaning treatment, to be implemented immediately before the final assembly and vacuum processing of ion traps,…
Neutral particles ejected from biological material under ultra short laser ablation have been investigated by laser post-ionization time-of-flight mass spectrometry. It could be shown, that beside ionized species, a substantial amount of…
The probability of multiple ionization of krypton by 50 femtosecond circularly polarized laser pulses, independent of the optical focal geometry, has been obtained for the first time. The excellent agreement over the intensity range 10…
The employment of ultrashort laser sources at the mid-IR spectral region for transparent materials is designed to open new routes for laser patterning and a wealth of exciting applications in optics and photonics. To elucidate the material…
The basic understanding of high-intensity femtosecond laser absorption in a solid is crucial for high-energy-density science. This multidimensional problem has many variables like laser parameters, solid target material, and geometry of the…
We report the laser cooling of a single $^{40}\text{Ca}^+$ ion in a Penning trap to the motional ground state in one dimension. Cooling is performed in the strong binding limit on the 729-nm electric quadrupole $S_{1/2}\leftrightarrow…
During the last decade, the laser trapping technique has been actively applied to elucidate the property of macromolecules, DNA, RNA, cytoskeleton fibres, etc. Due to the inherent difficulty in the direct trapping of single molecules at…
Laser pulses with a duration of the order of femtoseconds lead to a strong excitation, heating and potentially to ablation of the irradiated material. During the time of strong excitation, the interaction of the atoms and thus the material…
The effect of the laser ray incidence angle on the mass ablation rate and ablation pressure of planar inertial confinement fusion (ICF) targets is explored using an idealized model. Polar direct drive (PDD) on the National Ignition Facility…
In this work, solid targets made from boron and boron nitride (BN) materials are ablated by a nanosecond pulsed laser at sub-atmospheric pressures of nitrogen and helium gases. Excited species in the ablation plume from the target are…
The material emitted from the target surface during laser ablation generates a net thrust (propulsion) in the opposite direction. The energetic efficiency of this laser-driven propulsion is given by the mechanical coupling coefficient (Cm).…
Laser cooling typically requires one or more repump lasers to clear dark states and enable recycling transitions. Here, we have achieved cooling of Be+ ions using a single laser beam, facilitated by one-dimensional heating through…
The fused deposition modeling is one of the most rapidly developing 3D printing techniques, with numerous applications, also in the field of applied electrochemistry. Here, utilization of conductive polylactic acid (C-PLA) for 3D printouts…
We demonstrate trapping in a surface-electrode ion trap fabricated in a 90-nm CMOS (complementary metal-oxide-semiconductor) foundry process utilizing the top metal layer of the process for the trap electrodes. The process includes doped…