Related papers: A microfabricated sensor for thin dielectric layer…
Boosting the sensitivity of solid-state gas sensors by incorporating nanostructured materials as the active sensing element can be complicated by interfacial effects. Interfaces at nanoparticles, grains, or contacts may result in non-linear…
A novel microfabricated, all-electrical measurement platform is presented for a direct, accurate and rapid determination of the thermal conductivity and diffusivity of liquid and solid materials. The measurement approach is based on the…
Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric…
A mid-infrared laser-based sensor is designed and demonstrated for trace detection of benzene, acetylene, and carbon dioxide at ambient conditions. The sensor is based on a distributed feedback quantum cascade lase and a multidimensional…
Ultrathin microscale resistive thermometers are of key value to many applications. Here we have fabricated a laser machined 50 ${\mu}$m wide and 50 nm thick serpentine Pt thin film sensor capable of sensing temperatures up to 650 ${^\circ}$…
Capacitive technology allows building sensors that are small, compact and have high sensitivity. For this reason it has been widely adopted in robotics. In a previous work we presented a compliant skin system based on capacitive technology…
Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers, and having the potential to provide a step-change in our modern technological capabilities. To…
We report on a non-interacting technique for thermal characterization of fluids based on surface plasmon resonance interrogation. Using liquid volumes less than 20 micro liters we have determined the materials' thermo-optic coefficients…
We report the implementation of energy dispersive X-ray spectroscopy for layered semiconductors in the form of atomically thin transition metal dichalcogenides. The technique is based on a scanning electron microscope equipped with a…
A novel wireless microstrip-based RF sensor designed for detecting changes in ionic content of water and the addition of solid contaminant objects is proposed and demonstrated. The sensor can be installed on the exterior wall of dielectric…
Silicon detectors typically require an insensitive area around their periphery to accommodate guard rings, which help maintain the electric field uniformity around edge pixels and isolate the high leakage current from the physical edges of…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
Metal-coated microsphere monolayers (MCM) are a class of plasmonic crystals consisting of noble metal films over arrays of self-assembled colloidal microspheres. Despite their ease of fabrication and tunable plasmonic response, their…
Micro-electro mechanical systems (MEMS) thermal flow sensors are increasingly used for compact, low-power flow monitoring in biomedical applications. However, silicon-based method for sensor fabrication is limited by high cost, rigidity,…
In this paper, a capacitive flexible tactile sensor was designed to measure the pressure of objects based on MEMS technology. This sensor is a structure of a 4x4 array, with metal Ag as the capacitive electrode, which forms the tactile…
Very thin (1.2-2.5nm) self-assembled organic dielectric monolayers have been integrated into organic thin-film diode to achieve electrical characteristics. These dielectrics are fabricated by self-assembling deposition, resulting in smooth,…
A high-sensitivity thermal sensing is demonstrated by coating a layer of polydimethylsiloxane (PDMS) on the surface of a silica toroidal microresonator on a silicon wafer. Possessing high-Q whispering gallery modes (WGMs), the PDMS-coated…
The silicon suboxide SiOx (x<2.0) offers promising industrial application possibilities ranging from electrodes in lithium-ion batteries, which are used widely in electrical vehicles and portable devices to sensing applications. Therefore,…
The need for precise characterization of dual-phase xenon detectors has grown as the technology has matured into a state of high efficacy for rare event searches. The Michigan Xenon detector was constructed to study the microphysics of…
We propose that a photonic array of resonant circular dielectric waveguides with subwavelength grating can be designed as a robust and sensitive topological chemical sensor. The device can detect trace amounts of a given chemical species…