Related papers: On thermal effects in solid state lasers: the case…
We produce YbF molecules with a density of 10^18 m^-3 using laser ablation inside a cryogenically-cooled cell filled with a helium buffer gas. Using absorption imaging and absorption spectroscopy we study the formation, diffusion,…
A ytterbium doped silica optical fiber has been cooled by 18.4K below ambient temperature by pumping with 20W of 1035nm light in vacuum. In air, cooling by 3.6K below ambient was observed with the same 20W pump. The temperatures were…
The modeling of deposition rates in Thermal Laser Epitaxy (TLE) is essential for the accurate prediction of the evaporation process and for improved dynamic process control. We demonstrate excellent agreement between experimental data and a…
This paper presents a study of accuracy issues in thermal modeling of high power LED modules on system level. Both physical as well as numerical accuracy issues are addressed. Incorrect physical assumptions may result in seemingly correct,…
We report the complete characterization of various cooling grade Tm-doped crystals including the first demonstration of optical refrigeration in Tm:YLF crystals. Room temperature laser cooling efficiencies of 1% and 2% (mol) Tm:YLF, and 1%…
In this work we present results of the analysis of thermal properties of high-power laser bars obtained by spatially resolved thermoreflectance (TR) spectroscopy. Thermoreflectance is a modulation technique relying on periodic facet…
While conventional lasers are based on gain media with three or four real levels, unconventional lasers including virtual levels and two-photon processes offer new opportunities. We study lasing that involves a two-photon process through a…
The utilization and engineering of thermo-optic effects have found broad applications in integrated photonic devices, facilitating efficient light manipulation to achieve various functionalities. Here, we perform both an experimental…
A method for active control of the spatial profile of a laser beam using adaptive thermal lensing is described. A segmented electrical heater was used to generate thermal gradients across a transmissive optical element, resulting in a…
An optical comb featuring an unusual structure has been recently observed in a fiber-loop laser running at cryogenic temperatures. In the present work, the effect of optical polarization on the operation of the laser is explored.…
The most attractive feature of dusty plasmas is the possibility to create strong correlations at room temperatures. At the same time, these plasmas allow for a precise diagnostics with single-particle resolution. From such measurements, the…
Transient state of femtosecond laser excited bismuth has been studied by various groups with time-resolved optical, x-ray, and electron probes at the deposited energy density from below through up to several times the equilibrium enthalpy…
Thermal effects are critical constrains for developing high-power thulium-doped fiber lasers (TDFLs). In this paper, we numerically investigate the lasing and thermal characteristics of the TDFLs under different pump transitions. Our…
Laser cooling of rare-earth doped solids has been demonstrated across a wide range of material platforms, inspiring the development of simple phenomenological models such as the four-level model to elucidate the universal properties of…
In the past, laser propagation in a fluid with heat transfer has been modeled using simplistic conduction and convection conditions yielding inaccurate predictions. Here we present a detailed numerical study describing the thermal profile…
Photothermal heating represents a major constraint that limits the performance of many nanoscale optoelectronic and optomechanical devices including nanolasers, quantum optomechanical resonators, and integrated photonic circuits. Although…
In the laser processing of glass, a ~50-1000 $\mu$m-thick layer of glass is heated to a high temperature by the laser beam. Due to the shallow depth of this hot layer, the infrared emission and absorption spectra may deviate from the…
We demonstrate an ultraviolet diode laser system for cooling of trapped ytterbium ions. The laser power and linewidth are comparable to previous systems based on resonant frequency doubling, but the system is simpler, more robust, and less…
Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro- and nano- lengths scales. A key issue for efficient material processing is the determination of the…
Three-dimensional metallic microstructures find applications as stents in medicine, as ultrabroadband antennas in communications, in micromechanical parts or as structures of more fundamental interest in photonics like metamaterials. Direct…