Related papers: On thermal effects in solid state lasers: the case…
Transmission of high power laser beams through partially absorbing materials modifies the light propagation via a thermally-induced effect known as thermal lensing. This may cause changes in the beam waist position and degrade the beam…
Recent advances in power scaling of fiber lasers are hindered by the thermal issues, which deteriorate the beam quality. Anti-Stokes fluorescence cooling has been suggested as a viable method to balance the heat generated by the quantum…
Ytterbium (Yb) doped fiber lasers are known to be affected by the creation of color centers during lasing (socalled photodarkening (PD)). In a previous work, this defect creation was investigated from a spectroscopic point of view, showing…
A lightsail can be accelerated to ultra-high speed by the radiation pressure of a laser having an intensity of the order of GW/m$^2$, which though presents a critical challenge in the thermal management of lightsails. In this letter, we…
The laser beam weldability of acrylonitrile/butadiene/styrene (ABS) plates is determined by combining both experimental and theoretical aspects. In modeling the process, an optical model is used to determine how the laser beam is attenuated…
Laser cooling of a solid is achieved when a coherent laser illuminates the material, and the heat is extracted by resulting anti-Stokes fluorescence. Over the past year, net solid-state laser cooling was successfully demonstrated for the…
In their article, the authors of [Opt. Express 23, 4981 (2015)] observe step-like behavior and hysteresis of the output power of a diode-end-pumped Nd:YVO 4-laser as a function of pump power. While claiming that this behavior is a proof of…
We report the first demonstration of solid-state optical refrigeration of a Ho-doped material. A 1 mol% Ho-doped Yttrium Lithium Fluoride (YLF) crystal is cooled by mid-IR laser radiation, and its external quantum efficiency and parasitic…
We show theoretically that thermomechanical effects in dye-doped nematic liquid crystals when illuminated by laser beams, can become important and lead to molecular reorientation at intensities substantially lower than that needed for…
We report direct and absolute temperature measurements in a diode-end-pumped Yb:YAG crystal, using a calibrated infrared camera, with a 60-$\mu$m spatial resolution. The heat transfer coefficient has been measured, for the first time to our…
We report laser cooling of Yb3+-doped KY3F10 (Yb:KY3F10) driven by a 100-W, 1020-nm pump source. Despite pumping at a non-optimal wavelength, high-quality KY3F10 crystals doped with 3% and 7% Yb were cooled to 145 K and 151 K, respectively,…
We analyse the influence of heat generation by non radiative transitions in high power 1.55$\mu$m double cladding Erbium-Ytterbium fiber laser. At strong pumping rates, 1$\mu$m lasing can start due to parasitic reflections. We present a…
We use two-dimensional transverse laser cooling to produce an ultracold beam of YbF molecules. Through experiments and numerical simulations, we study how the cooling is influenced by the polarization configuration, laser intensity, laser…
We present a theoretical investigation of the dynamics of the dielectric constant of noble metals following heating with ultrashort pulsed laser beams and the influence of the temporal variation of the associated optical properties in the…
The temperature-dependent photoluminescence of perovskite quantum dots (CsPbBr3) in the visible band, is analyzed to evaluate their suitability for use in thermometry. A differential measurement of the photoluminescence can be used to…
Laser cooling of a solid is achieved when a coherent laser illuminates the material in the red tail of its absorption spectrum, and the heat is carried out by anti-Stokes fluorescence of the blue-shifted photons. Solid-state laser cooling…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…
Measuring thermal properties of materials is not only of fundamental importance in understanding the transport processes of energy carriers (electrons and phonons) but also of practical interest in developing novel materials with desired…
Since the first proof-of-concept demonstrations of photoluminescence-based optical refrigeration, solid-state laser cooling has developed into a credible competitor to conventional cryogenic technologies. Solid-state laser cooling continues…
In this paper, a detailed theoretical treatment of the three dimensional photothermal deflection, under modulated cw excitation, is presented for a three layer system (backing-solid sample- fluid).By using a technique based on Green's…