Instrumentation and Detectors
Silicon strip sensors have long been a reliable technology for particle detection. Here, we push the limits of silicon tracking detectors by targeting an unprecedentedly low material budget of 2%-7% $X_0$ in an 8-layer 4 m$^2$ detector…
With the next upgrade of the ALICE inner tracking system (ITS3) as its primary focus, a set of small MAPS test structures have been developed in the 65 nm TPSCo CMOS process. The CE-65 focuses on the characterisation of the analogue charge…
Resistive Plate Chamber (RPC) is one of the most commonly used detectors in high energy physics experiments for triggering and tracking because of its good efficiency ($\textgreater$~90\%) and time resolution ($\sim$~1-2~ns). Generally,…
The comparison of optical reference frequency signals over free-space optical links is limited by the relative motion between local and remote sites. For ground to low earth orbit comparison, the expected Doppler shift and Doppler rate…
The pursuit of enhanced nuclear safety has spurred the development of accident-tolerant cladding (ATC) materials for light water reactors (LWRs). This study investigates the potential of repurposing these ATCs in advanced reactor designs,…
Radiation hard n-Fz Double Sided Silicon microstrip Detectors are used at the Silicon Tracker for the detection of two-dimensional position and energy measurement of the incident protons in the R3B experiment at FAIR, Darmstadt, Germany.…
The Gaseous Electron Multiplier-based Time Projection Chamber (GEM-TPC) in TWIN configuration for particle tracking has been consolidated after extensive investigations in different facilities to study its tracking performance. The most…
DarkSide-20k is a novel liquid argon dark matter detector currently under construction at the Laboratori Nazionali del Gran Sasso (LNGS) of the Istituto Nazionale di Fisica Nucleare (INFN) that will push the sensitivity for Weakly…
The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment…
Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a…
Neutron sources can play a variety of roles in warhead verification. For transmission radiography, a source of directed high energy neutrons is required, while for applications to detect fissile isotopes, sub-MeV neutrons are preferred. The…
This study investigates the moderation of 14.1 MeV neutrons in a natural beryllium moderator arranged in a spherical geometry. The neutron interactions and moderation efficiency were analyzed using Monte Carlo simulations with the GEANT4…
The SuperNEMO experiment is searching for neutrinoless double beta decay of \textsuperscript{82}Se, with the unique combination of a tracking detector and a segmented calorimeter. This feature allows to detect the two electrons emitted in…
The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the…
We present absolute frequency measurements of a laser stabilized using an offset sideband locking technique on the P(49)24-1 rovibrational transition of $^{127}\mathrm{I}_2$ near 556 nm. The P(49)24-1 transition is offset by 4.8 GHz from…
The combination of Micro-Pattern Gaseous Detectors (MPGDs) and pixel charge readout enables specific experimental opportunities. Using the Timepix4 for the readout is advantageous because of its size (around 7 cm^2 active area) and its…
The BeEST experiment is measuring the ${}^{7}$Li recoil spectrum from the decay of ${}^{7}$Be implanted into Ta-based sensors to provide the most stringent limits on the existence of sterile neutrinos in the sub-MeV mass range. Its…
A study of antiproton annihilations at rest on thin solid targets is underway at the ASACUSA facility, which now features a dedicated beam line for slow extraction at 250 eV. The experiment will employ new technologies, such as the Timepix4…
The STS detector in the CBM experiment delivers data via multiple e-links connected to GBTX ASICs. In the process of data aggregation, that data must be received, combined into a smaller number of streams, and packed into so-called…
A modification of the optical model for rough surfaces, implemented in Geant4 as a part of the unified model, is suggested. The modified model takes into account the variation of the interaction probability of the photon with the microfacet…