Related papers: Improving the sensitivity of FM spectroscopy using…
Ultra-low frequency noise lasers have been widely used in laser-based experiments. Most narrow-linewidth lasers are implemented by actively suppressing their frequency noise through a frequency noise servo loop (FNSL). The loop bandwidths…
We report on our initial attempt to characterize the intrinsic frequency response of metal-clad nanolasers. The probed nanolaser is optically biased and modulated, allowing the emitted signal to be detected using a high-speed photodiode at…
Colloidal probes are often used in force microscopy when the geometry of the tip-sample interaction should be well controlled. Their calibration requires the understanding of their mechanical response, which is very sensitive to the details…
We devise a laser-controlled adaptive optical element which operates intracavity under high intensity radiation. This element substitutes a conventional mechanically deformable mirror and is free of critical heat-sensitive components and…
Interatomic-force measurements are regularly performed using frequency-modulation atomic force microscopy. This requires conversion of the observed shift in the resonant frequency of a force-sensing cantilever, to the actual force…
Calorimeters operating in high-radiation environments are susceptible to damage, leading to increased noise that can significantly degrade energy resolution. A common way to mitigate noise is to apply a higher energy threshold on the cells,…
General quantum restrictions on the noise performance of linear transistor amplifiers are used to identify the region in parameter space where the quantum-limited performance is achievable and to construct a practical procedure for…
To date, micro- and nano-scale optomechanical systems have enabled many proof-of-principle quantum operations through access to high-frequency (GHz) phonon modes that are readily cooled to their thermal ground state. However, minuscule…
We propose an experiment utilizing an array of cooled micro-cantilevers coupled to a sample of ultra-cold atoms trapped near a micro-fabricated surface. The cantilevers allow individual lattice site addressing for atomic state control and…
Recently, using an Atomic Force Microscope and a single cantilever excited at different frequencies it was shown that water nanomeniscus can exhibit a transition in mechanical responses when submitted to stimuli above few tens of kHz. The…
The sensitivity of next-generation gravitational-wave detectors such as Advanced LIGO and LCGT should be limited mostly by quantum noise with an expected technical progress to reduce seismic noise and thermal noise. Those detectors will…
The use of Synthetic Aperture Radar (SAR) has greatly advanced our capacity for comprehensive Earth monitoring, providing detailed insights into terrestrial surface use and cover regardless of weather conditions, and at any time of day or…
Interferometric detection of mirror displacements is intrinsically limited by laser shot noise. In practice, however, it is often limited by thermal noise. Here we report on an experiment performed at the liquid helium temperature to…
Nanolasers operating at low power levels are strongly affected by intrinsic quantum noise, influencing both intensity fluctuations and laser coherence. Starting from semiclassical rate equations and making a simple hypothesis for the phase…
Lasers with high spectral purity are indispensable for optical clocks and coherent manipulation of atomic and molecular qubits for applications such as quantum computing and quantum simulation. Stabilisation of the laser to a reference can…
We present a simple technique to produce active Q-switching in various types of fiber amplifiers by active integration of an electrostatic actuated deformable metallic micro-mirror. The optical MEMS (MOEMS) device acts as one of the laser…
Quantum metrology seeks to leverage the richness of quantum systems for making better measurements than are possible using only classical resources in order to gain a ``quantum advantage''. Quantum metrology schemes must also be resilient…
Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit fidelity of operation. Here, we…
Nano electromechanical systems are considered as ultra sensitive devices for mass and force detection. Capacitive actuation is widely used in these devices but is known to degrade the quality factor of the resonator due to DC electrostatic…
We developed a process to fabricate nanoscale metallic gate electrodes on scanning probe cantilevers, including on the irregular surface of protruding cantilever tips. The process includes a floating-layer technique to coat the cantilevers…