Related papers: Monitoring the Stability of the ALEPH Vertex Detec…
We present an experimental realization of the Optical Frequency Locked Loop (OFLL) applied to long-term frequency difference stabilization of broad-line DFB lasers. The presented design, based on an integrated phase-frequency detector chip,…
We achieved a 0.5 Hz optical beat note line width with ~ 0.1 Hz/s frequency drift at 972 nm between two external cavity diode lasers independently stabilized to two vertically mounted Fabry-Perot (FP) reference cavities. Vertical FP…
ATLAS is a general purpose experiment approved for the LHC collider at CERN. An important component of the detector is the central hadronic calorimeter; for its construction more than 600,000 Wave Length Shifting (WLS) fibres (corresponding…
We present a compact laser frequency stabilization method by locking a 556 nm laser to a high-precision wavelength meter. Unlike traditional schemes that rely on optical cavities or atomic references, we stabilize the laser frequency via a…
The three goals of this PhD thesis are to improve the understanding of the mechanisms underlying the dynamical instabilities observed in semiconductor lasers subject to external optical feedback, to propose a technique to suppress these…
Liquid argon detectors are employed in a wide variety of nuclear and particle physics experiments. The addition of small quantities of xenon to argon modifies its scintillation, ionization, and electroluminescence properties and can improve…
Arm-locking frequency stabilization is a key technique for suppressing laser frequency noise in space-based gravitational-wave detectors. The robustness of the arm-locking control loop is crucial for maintaining laser frequency stability,…
Laser metal deposition (LMD) is an additive manufacturing technique, whose performances can be influenced by several factors and parameters. Monitoring their evolution allows for a better comprehension and control of the process, hence…
Currently, the German/British gravitational wave detector GEO600 is being upgraded in course of the GEO-HF program. One part of this upgrade consists of the integration of a squeezed light laser to nonclassically improve the detection…
Pairing coherent correlation OTDR with low-complexity analysis methods, we investigate the detection of fast temperature changes and vibrations in optical fibers. A localization accuracy of ~2 m and extraction of vibration amplitudes and…
We report on the development and performance evaluation of an ultra-stable clock laser for an $\rm ^{27}Al^+$ optical clock. The thermal noise limited ultra-stable laser is developed based on a 30 cm long ultra-stable cavity. Three…
Traditional wavefront control in high-energy, high-intensity laser systems usually lacks real-time capability, failing to address dynamic aberrations. This limits experimental accuracy due to shot-to-shot fluctuations and necessitates long…
To meet the strain sensitivity requirements [1], [2] of the Laser Interferometer Gravitational Wave Observatory (LIGO), the laser frequency and amplitude noise must initially be reduced by a factor of 1000 in the pre-stabilized portion of…
State-of-the-art optical oscillators based on lasers frequency stabilized to high finesse optical cavities are limited by thermal noise that causes fluctuations of the cavity length. Thermal noise represents a fundamental limit to the…
There exists an enormous interest for the study of very high energy domain in particle physics, both theoretically and experimentally, in the aim to construct a general theory of the fundamental constituents of matter and of their…
The use of averaging has long been known to reduce noise in statistically independent systems that exhibit similar levels of stochastic fluctuation. This concept of averaging is general and applies to a wide variety of physical and man-made…
We present the experimental realization of a laser system for ground to satellite optical Doppler ranging at the atmospheric turbulence limit. Such a system needs to display good frequency stability (a few parts in 10^{-14}) whilst allowing…
Optical lattices play a significant role in the field of cold atom physics, particularly in quantum simulations. Varying the lattice period is often a useful feature, but it presents the challenge of maintaining lattice phase stability in…
A speckle correlation based optical lever (SC-OptLev) is constructed for the measurement of small changes in the angle of orientation of a surface. The dynamic range of SC-OptLev is found to be twice that of a conventional OptLev for the…
The ALPS experiment at DESY searches for light particles which are coupling very weakly to photons. Primary physics goal is the search for axion like particles in a photon regeneration experiment. Central part of the experimental setup is a…