Related papers: Field Emission Dark Current of Technical Metallic …
A novel method of electron beam cooling is considered which can be used for linear colliders. The electron beam is cooled during collision with focused powerful laser pulse. With reasonable laser parameters (laser flash energy about 10 J)…
High peak and average power free-electron lasers (FELs) in the terahertz region (THz) require small diameter, low-emittance, and high voltage electron beams. This paper presents two 1.5-2 MV, 100-200 A, thermionic cathode electron source…
Low voltage scanning electron microscopy is a powerful tool for examining surface features and imaging beam sensitive materials. Improving resolution during low voltage imaging is then an important area of development. Decreasing the effect…
This document describes the concept of a primary electron beam facility at CERN, to be used for dark gauge force and light dark matter searches. The electron beam is produced in three stages: A Linac accelerates electrons from a…
One of the main features of two-phase detectors with electroluminescence (EL) gap being developed in our laboratory for dark matter search is the extensive use of THGEMs (Thick Gas Electron Multipliers). In various versions of the detector,…
In this Letter we report on the experimental generation of high energy (10 GeV), ultra-short (fs-duration), ultra-high current (0.1 MA), petawatt peak power electron beams in a particle accelerator. These extreme beams enable the…
By measuring energy spectra of the electron emission from a sharp tungsten tip induced by few-cycle laser pulses, the laser-field dependence of the emission mechanism was investigated. In strong laser fields, we confirm the appearance of…
An approach to utilize Low Energy Surface Flashover (LESF) for triggering the discharge in electric propulsion systems has been demonstrated. LESF uses conventional surface flashover mechanism with limited duration of high-current stage of…
Electron acceleration to non-thermal energies in low Mach number (M<5) shocks is revealed by radio and X-ray observations of galaxy clusters and solar flares, but the electron acceleration mechanism remains poorly understood. Diffusive…
Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking…
Dark current and multiple electron impacts (multipacting), as for example observed in radio frequency (RF) structures of accelerators, are usually harmful to the equipment and the beam quality. These effects need to be suppressed to…
In a Low Energy Beam Transport line (LEBT), the emittance growth due to the beam's space charge is typically suppressed by way of neutralization from either electrons or ions, which originate from ionization of the background gas. In cases…
Reported here is the first demonstration of electron beam generation in an SRF TESLA 1.3 GHz gun equipped with field emission cathode when operated at 2 Kelvin. The cathode is submicron film of nitrogen-incorporated ultrananocrystalline…
Guiding relativistically intense laser pulses in low-density plasmas enables extended acceleration lengths in laser-plasma accelerators (LPAs), allowing for the production of multi-GeV electron beams. Quantitative interpretation of such…
Secondary electron emission (SEE) from solids plays an important role in many areas of science and technology.1 In recent years, there has been renewed interest in the experimental and theoretical studies of SEE. A recent study proposed…
The Wide Field Imager (WFI), one of two instruments on ESA's next large X-ray mission Athena, is designed for imaging spectroscopy of X-rays in the range of 0.2 to 15 keV with a large field of view and high count rate capability. The focal…
A new approach to the development of extraction systems capable of forming ion beams with previously inaccessible intensity is proposed. The use of inhomogeneous accelerating field allows to improve the ion beam formation efficiency…
A light emitting diode (LED) pulser has been developed that can be used for tests or calibration of timing and amplitude sensitivity of particle physics detectors. A comparative study is performed on the components and pulser output…
Materials to be deployed in space applications have to undergo a variety of different test scenarios, simulating actual space conditions. Among these materials solar photovoltaic cells, optics, meta-materials and more will be directly…
We find that, under appropriate conditions, electrons can pass a barrier etched across a two dimensional electron gas (2DEG) by field emission from the GaAs/AlGaAs heterojunction into a second, low-density 2DEG formed deep in the substrate.…