Related papers: Direct and absolute temperature mapping and heat t…
Reliable and accurate characterization of the electrocaloric effect is necessary to understand the intrinsic properties of materials. To date, several methods have been developed to directly measure the electrocaloric effect. However, each…
The objective of this work is to investigate the coupling of fluid dynamics, heat transfer and mass transfer during the impact and evaporation of droplets on a heated solid substrate. A laser-based thermoreflectance method is used to…
An experimental investigation was carried out to study heat transfer rates in a high-temperature, high-pressure region generated using the shock focusing technique. A shock tube test facility with a specially designed spherically converging…
In this opinion piece, we discuss recent advances in experimental methods for characterizing phase change heat transfer. We begin with a survey of techniques for high-resolution measurements of temperature and heat flux at the solid surface…
Accurate temperature measurement at the nanoscale is crucial for thermal management in next-generation microelectronic devices. Existing optical and scanning-probe thermometry techniques face limitations in spatial resolution, accuracy, or…
A review of theoretical and experimental studies of thermal effects in solid-state lasers is presented, with a special focus on diode-pumped ytterbium-doped materials. A large part of this review provides however general information…
We present a technique based on high resolution imaging to measure the absolute temperature and the heating rate of a single ion trapped at the focus of a deep parabolic mirror. We collect the fluorescence light scattered by the ion during…
Measurements of surface temperature fields are used to determine the heat transfer by conduction and convection from an inhomogeneously heated metallic tube into environment. For most of the here reported measurements we use a low-cost…
We measure ion heating following transport throughout a Y-junction surface-electrode ion trap. By carefully selecting the trap voltage update rate during adiabatic transport along a trap arm, we observe minimal heating relative to the…
Numerical simulations of heat transport in diamond anvil cells reveal a possibility for absolute measurements of specific heat via high-frequency modulation calorimetry. Such experiments could reveal and help characterize temperature-driven…
Heat capacity measurements using the ac steady state method are often considered difficult to provide absolute accuracy. By adjusting the working frequency to maintain a constant phase and using the phase information to obtain the heat…
We present measurements of the electron temperature using gate defined quantum dots formed in a GaAs 2D electron gas in both direct transport and charge sensing mode. Decent agreement with the refrigerator temperature was observed over a…
Temperature field contactless measurements in or at the surfaces of semitransparent media are a scientific challenge, as classical thermography techniques based on proper material emission cannot be used. In this work, an alternative method…
In this paper the methodology and the results of a quasi real-time thermal characterization tool and method for the temperature mapping of circuits and boards based on sensing the infrared radiation will be introduced. With the proposed…
Specific heat and entropy are relevant thermodynamic properties, which may be used as macroscopic probes to microscopic properties of materials under ambient conditions and under high applied fields. However, the measurement of specific…
We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum…
A high temperature superconducting detector was fabricated to capture the thermal images in room temperature background. The detector was made of YBa2Cu3O7-{\delta} (YBCO) superconducting thin film deposited on an Yttria Stabilized Zirconia…
We measure the minimum achievable temperature (MAT) as a function of excitation wavelength in anti-Stokes fluorescence cooling of high purity Yb3+-doped LiYF4 (Yb:YLF) crystal. Such measurements were obtained by developing a sensitive…
In this study, we report on a direct measurement method for the electrocaloric effect, the heating/cooling upon application/removal of an electric field in dielectric materials, based on a lock-in thermography technique. By use of…
Despite being regarded as a well-established field, temperature measurement continues to pose significant challenges for many professionals in the metrology industry. Thermal imagers enable fast, non-contact and a full field measurement,…