Related papers: Demonstration of fundamental mode only propagation…
Energy dispersive X-ray fluorescence (EDXRF) is a widely used non-destructive technique for micro and trace multi-element analysis of materials. Conventional trials show that using laboratory assisted EDXRF measurements, one can obtain…
A simple optical circuit made by a cascade of two graphene-on-silicon electro absorption modulators (EAMs) of different length is used for the optical pre-emphasis of 10 Gb/s non-return-to-zero (NRZ) signals by delay-inverse-weight…
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially…
Metasurfaces have attracted extensive interests due to their ability to locally manipulate optical parameters of light and easy integration to complex optical systems. Particularly, metasurfaces can provide a novel platform for splitting…
We proposed the method of the optical fiber modal decomposition of the radiation propagating in a multimode optical fiber with a step like refractive index profile. The field distribution at the output end of the fiber was used. The method…
Diffraction is a fundamental property of light propagation. Owing to this phenomenon,light diffracts out in all directions when it passes through a subwavelength slit.This imposes a fundamental limit on the transverse size of a light beam…
An all solid large modearea (LMA) chalcogenide based microstructured core optical fiber (MCOF) is designed and proposed for high power handling in the mid IR spectral regime, covering the entire second transparency window of the atmosphere…
We demonstrate thermalization and Bose-Einstein (BE) distribution of photons in standard erbium-doped fibers (edf) in a broad spectral range up to ~200nm at the 1550nm wavelength regime. Our measurements were done at a room temperature…
Optical emission from rare-earth-doped fluoride fibers has thus far been limited to less than 4 {\mu}m. We extend emission beyond this limit by employing an indium fluoride (InF3) glass fiber as the host, which exhibits an increased…
We present measurements of how multimode fiber focal-ratio degradation (FRD) and throughput vary with levels of fiber surface polish from 60 to 0.5 micron grit. Measurements used full-beam and laser injection methods at wavelengths between…
This work demonstrates a computational method for predicting the light propagation through a single multimode fiber using a deep neural network. The experiment for gathering training and testing data is performed with a digital micro-mirror…
We propose an energy transfer model with a cubic atomic population dependence to accurately model the behavior of various reported high-power erbium-doped fluoride fiber lasers operating near 2.8 microns. We first show that the previously…
We report an industry leading optical dense wavelength division multiplexing (DWDM) field trial with line rates per channel exceeding 1.66 Tb/s using 130 GBaud dual-polarization probabilistic constellation shaping 256-ary quadrature…
We propose and demonstrate two methods for modal decomposition in multi-mode fibres. Linearly polarized modes propagating in a slightly multi-mode fibre are easily retrieved from intensity measurements at the fibre output surface. The first…
We demonstrate the channeling of fluorescence photons from quantum dots (QDs) into guided modes of an optical nanofiber tip (ONFT). We deposit QDs on the ONFT using micro/nano fluidic technology. We measure the photon-counting and emission…
While industrial-grade Yb-based amplifiers have become very prevalent, their limited gain bandwidth has created a large demand for robust spectral broadening techniques that allow for few-cycle pulse compression. In this work, we perform a…
We report the characterisation of anti-resonant hollow core optical fibres guiding at least 50 spatial modes in the infrared. Their propagation losses were measured to be between 0.1 and 0.2 dB/m from 1000 to 1500 nm wavelength, with bend…
The temperature dependency of the saturated signal power for the transition in erbium-doped fiber amplifiers (EDFAs) pumped at 980 nm and 1480 nm pump wavelengths within a temperature range from 20 to 60 oC are investigated by a novel…
The effect of Kerr-induced optical fiber nonlinearities in C-band (5 THz) EDFA and C+L-band (12.5 THz) Raman-amplified optical communication systems has been studied considering the impact of third-order fiber dispersion. The performance of…
We derive exact strong-contrast expansions for the effective dielectric tensor $\epeff$ of electromagnetic waves propagating in a two-phase composite random medium with isotropic components explicitly in terms of certain integrals over the…