Related papers: The 2 mrad crossing-angle ILC interaction region a…
The ILC baseline consists of two interaction regions, one with a 20mrad crossing angle and the other with a 2mrad crossing angle. It is known that the outgoing beam losses in the final doublet and subsequent extraction line are larger in…
The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then…
In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the International Linear Collider and reduce the power losses. The result is a set of three new final doublet layouts with…
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more…
The goal of this study is to evaluate the impact of the latest ILC beam parameters at the Interaction Point (IP), as specified in the 2013 ILC Technical Design Report (TDR), on beam losses in the extraction line. The previous beam loss…
The e-e- running mode is one of the interesting physics options at the International Linear Collider (ILC). The luminosity for e-e- collisions is reduced by the beam-beam effects. The resulting beamstrahlung energy loss and beam-beam…
The ILC beam dumps are a key part of the accelerator design. At Snowmass 2005, the current status of the beam dump designs were reviewed, and the options for the overall dump layout considered. This paper describes the available dump…
The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities…
At this time, the design of the International Linear Collider (ILC) is optimized for e+e- collisions; the photon collider (gamma-gamma and gamma-electron) is considered as an option. Unexpected discoveries, such as the diphoton excess F(750…
The two main functions of the NLC extraction line include: 1) transmission of the outgoing disrupted beam and secondary particles to the dump with minimal losses; and 2) beam diagnostics and control. In this report, we describe the…
The ILD detector is proposed for an electron-positron collider with collision centre-of-mass energies from 90~\GeV~to about 1~\TeV. It has been developed over the last 10 years by an international team of scientists with the goal to design…
The pair interaction between magnetic flux lines in a semi-infinite slab of an anisotropic type-II superconductor in an external field is derived in the London limit. The case where the applied field is normal to the superconductor/vacuum…
One of the key systems of a Muon Collider (MC) - seen as the most exciting option for the energy frontier machine in the post-LHC era - is its interaction region (IR). Designs of its optics, magnets and machine-detector interface are…
The International Large Detector (ILD) is one of the proposed detector concepts for the International Linear Collider (ILC). The work on the ILD machine-detector interface (MDI) concentrates on the optimisation of the experimental area…
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the…
Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the…
In this note, we briefly review the current lattice of the NLC extraction line which was designed for the nominal NLC beam parameters. Then we describe the beam parameters for the high luminosity option with larger beam disruption parameter…
Properties of the disrupted NLC beam at the Interaction Point (IP) and particle loss in the extraction line are analyzed as a function of beam-to-beam position and angular offset at IP. The simulations show that disruption and beam loss…
The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with…
Region extraction is a very common task in both Computer Science and Engineering with several applications in object recognition and motion analysis, among others. Most of the literature focuses on regions delimited by straight lines, often…