Related papers: A heat-and-pull rig for fiber taper fabrication
A novel photonic thermal diode concept operating in the near field and capitalizing on the temperature-dependence of coupled surface polariton modes in nanostructures is proposed. The diode concept utilizes terminals made of the same…
We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion…
We present a simple method to stabilize the optical path length of an optical fiber to an accuracy of about 1/100 of the laser wavelength. We study the dynamic response of the path length to modulation of an electrically conductive heater…
We demonstrate noncontact, high quality surface modification with spatial resolution of ~20 nm. The nanowriting is based on the interaction between the surface and the tip of an Atomic force microscope illuminated by a focused laser beam…
Manipulating mega biomolecules and micro-devices with light is highly appealing. Opto driving torque can propel micro-rotors to translational motion in viscous liquid, and then separate microsystems according to their handedness. We study…
We describe and demonstrate the use of an adaptive wave front optimization scheme for enhancing the efficiency of adiabatic nanofocusing of surface plasmon polariton (SPP) waves along an ultrasharp conical gold taper. Adiabatic nanofocusing…
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the Gigahertz range. This gap cannot be closed with simple shifting techniques.…
A new approach for fabricating open and closed porous structures based on laser processing is presented. Liquid polyimide (PI) was mixed with azodicarbonamide (ADC, ADA) which is a chemical blowing agent (CBA) and mixture was pre-cured in…
We demonstrate gain-switched fiber laser with bias pumping plays an important role in regulating chaotic relaxation spikes. Under certain conditions the profile of output pulse from gain-switched fiber laser can keep the same shape as that…
Repetition-rate-scanned lasers are practical in accordion frequency comb generation that serves as a variable gearbox connecting optical and radio wave domains. Rapid and wide-range scanned repetition rate can benefit versatile purposes,…
The demonstration of an optical fiber based probe for efficiently exciting the waveguide modes of high-index contrast planar photonic crystal (PC) slabs is presented. Utilizing the dispersion of the PC, fiber taper waveguides formed from…
There are many fields where it is of interest to measure the elastic moduli of tiny fragile fibers, such as filamentous bacteria, actin filaments, DNA, carbon nanotubes, and functional microfibers. The elastic modulus is typically deduced…
Optical fibers have emerged as a transformative platform for building better and more robust solid state lasers. However, the wavelengths available to these lasers are limited. Using hollow core optical fibers allows us to add gases as new…
We present a scanning probe technique for measuring the dynamics of individual fluxoid transitions in multiply connected superconducting structures. In these measurements, a small magnetic particle attached to the tip of a silicon…
We propose a novel technique for the creation of maximally entangled symmetric Dicke states in an ion trap using adiabatic passage, which requires only a pair of chirped pulses from a single laser and is applicable to any number of ions and…
This approach permits much finer adjustments of the beam direction and position when compared to other beam steering techniques of the same mechanical precision. This results in a much increased precision, accuracy and mechanical stability.…
We experimentally demonstrate the fabrication of optical micro/nanofibers (MNFs) using chemical etching and gas-flame techniques. In the chemical etching technique, a two-step process involves 40% and 24% of hydrofluoric acid solutions for…
Concept of high efficiency photon storage based on adiabatic confinement between concave mirrors is presented and experimentally investigated. The approach is insensitive to typical for Fabri-Perot cells requirements on quality of…
A stripline-type near-field microwave probe is microfabricated for microwave impedance microscopy. Unlike the poorly shielded coplanar probe that senses the sample tens of microns away, the stripline structure removes the stray fields from…
Hot Isostatic Pressing was applied to synthesize bulk samples with diameter up to 30 mm starting with Alfa Aesar magnesium diboride powder. HIPing at 2 kbar, 1000 C with cooling under pressure (DMCUP cycle) resulted in a fully dense (or low…