Related papers: High-speed Laser Micromachining with Copper Bromid…
Copper bromide vapor laser is the most successful sealed-off version of a plenty of copper vapor lasers launched, studied and produced for the last half of century. Being first reported in 1975, it became the leading and long-lasting R&D&T…
One of the main challenges in laser micromachining is the complexity of the process development. The available monitoring capabilities are mostly limited to external measurement systems, significantly slowing down this step. We address this…
Over the last decade advances in high temperature superconducting (HTS) materials have generated a renewed optimism in the use of this technology in future high-power applications including motors, generators, and power transmission. The…
We describe a micro-fabrication method to create concave features with ultra-low surface roughness in silica, either on the end facets of optical fibers or on flat substrates. The machining uses a single focused CO2 laser pulse. Parameters…
Femtosecond laser micromachining provides high precision and less thermal diffusion in surface structuring as a result of the ultrashort temporal duration and ultrahigh peak intensity of the femtosecond laser pulses. To increase the…
Here, to the best of our knowledge, for the first time we report the in-depth experimental study of high ultrafast laser ablation efficiency for processing of copper and steel with single-pulses, MHz-, GHz- and burst in the burst (biburst)…
Laser drilling becomes of increasing importance when hole diameter is in the range of 10 to 50 mum, for which conventional alternative approaches are becoming difficult and cost inefficient. Furthermore, it is viewed as the technique of…
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small…
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining…
One of the current trends of laser applications in material science is using high-intensity lasers to provide fast and efficient surface or volume modifications for achieving controllable material properties, synthesis of novel materials…
This letter describes the design and operation of a polymer-based third order distributed feed-back (DFB) microfluidic dye laser. The device relies on light-confinement in a nano-structured polymer film where an array of nanofluidic…
The remarkable temporal properties of ultra-short pulsed lasers in combination with novel beam shaping concepts enable the development of completely new material processing strategies. We demonstrate the benefit of employing focus…
Laser micro-welding is an advanced manufacturing method today applied in various domains. However, important physical limitations have prevented so far to demonstrate its applicability in silicon and other technology-essential…
Microscale additive manufacturing of reflective copper is becoming increasingly important for microelectronics and microcomputers, due to its excellent electrical and thermal conductivity. Yet, it remains challenging for state-of-the-art…
Laser-assisted stripping is a novel approach to H- charge exchange that overcomes long-standing limitations associated with the traditional, foil-based method of producing high-intensity, time-structured beams of protons. This paper reports…
A strongly focused laser beam can be used to trap, manipulate and exert torque on a microparticle. The torque is the result of transfer of angular momentum by scattering of the laser beam. The laser could be used to drive a rotor, impeller,…
Femtosecond laser ablation has been demonstrated to be a versatile tool to produce micro/nanoscale features with high precision and accuracy. However, the use of high laser fluence to increase the ablation efficiency usually results in…
Ultra-fast femtosecond (fs) lasers provide a unique technological opportunity to precisely and efficiently micromachine materials with minimal thermal damage owing to the reduced heat transfer into the bulk of the work material offered by…
We present an overview on the development and characterization of multiscale laser processing optics for versatile material modifications across more than six orders of magnitude. Starting with solutions for micromachining we present…
A four-wave-mixing, frequency-comb-based, hyperspectral imaging technique that is spectrally precise, potentially rapid, and can in principle be applied to any material, is demonstrated in a near-diffraction-limited microscopy application.