Related papers: Dry microfoams: Formation and flow in a confined c…
When using appropriate surfactants, oil and aqueous foam can be intimately mixed without the foam being destroyed. In this Letter, we show that a foam, initially free of oil, can draw an oil drop under the action of capillary forces and…
Aqueous foams are subject to coarsening, whereby gas from the bubbles diffuses through the liquid phase. Gas is preferentially transported from small to large bubbles, resulting in a gradual decrease of the number of bubbles and an increase…
Two dimensional (2D) laminar jet-----a stream of fluid that projected into a surrounding medium with the flow confined in 2D-----has both theoretical and experimental significance. We carried out 2D laminar jet experiments in freely…
Intuitively, slow droplets stick to a surface and faster droplets splash or bounce. However, recent work suggests that on non-wetting surfaces, whether microdroplets stick or bounce depends only on their size and fluid properties, but not…
This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a…
The acoustofluidic method holds great promise for manipulating microorganisms. When exposed to the steady vortex structures of acoustic streaming flow, these microorganisms exhibit intriguing dynamic behaviors, such as hydrodynamic trapping…
The highly confined flow of the liquid phase, trapped between the gas bubbles, is at the origin of the large effective viscosity of the liquid foams. Despite the industrial relevance of this complex fluid, the foam viscosity remains…
A small, spherical bubble of high internal pressure is inserted into water at constant ambient pressure as a model of a laser-induced bubble. Its subsequent dynamics near a flat solid boundary is studied in dependence on the distance of the…
In this article, we construct a novel 1D-model of microfluidic laminar flows in tapered circular and rectangular channels assuming the flow in channels fully developed. In the model, we take into account the inertance and dynamic pressure…
We investigate imbibition of a monodisperse emulsion into a low-aspect ratio microfluidic channel with the height h comparable to the droplet diameter d. For confinement ratio d/h = 1.2, the tightly confined disk-like droplets in the…
A nearly two-dimensionnal foam is generated inside a Hele-Shaw cell half-filled with a surfactant solution. The cell is then placed vertically on a tumbler so that it rotates around its center with the cell angular velocity as the control…
Diffusioosmotic flow arises in microfluidic configurations due to solute concentration gradients. In soft microfluidic channels, internal pressure gradients generated by diffusioosmotic flow to conserve mass result in elastic deformation of…
Using dissipative particle dynamics simulations, we study the effects of an embedding bulk fluid on the phase separation dynamics in a thin planar liquid film. The domain growth exponent is altered from 2D to 3D behavior upon the addition…
We investigate bubble deformations in an homogeneous and isotropic turbulent flow by means of direct numerical simulations of a single bubble in turbulence. We examine interface deformations by decomposing the local radius into the…
Monodisperse lipid-coated microbubbles are a promising route to unlock the full potential of ultrasound contrast agents for medical diagnosis and therapy. Here, we present a stand-alone lab-on-a-chip instrument that allows microbubbles to…
We present a versatile setup for investigating the nanofluidic behavior of nanoparticles as a function of the gap distance between two confining surfaces. The setup is designed as an open system which operates with small amounts of…
A novel micromixing technique that exploit a thrust of droplets into the mixing interface is developed. The technique enhances the mixing by injecting immiscible droplets in a mixing channel and the methodology enables a control of the…
Microchannels have increasingly been used to miniaturize heat transfer equipment, improve energy efficiency, and minimize heat transfer fluid inventory. A fundamental understanding of condensation in microscale will yield far-reaching…
Bubbles in complex fluids are often desirable, and sometimes simply inevitable, in the processing of formulated products. Bubbles can rise by buoyancy, grow or dissolve by mass transfer, and readily respond to changes in pressure, thereby…
This paper is the second of the series of two papers, which focuses on the derivation of an averaged 1D model for compressible bubbly flows. For this, we start from a microscopic description of the interactions between a large but finite…