Related papers: Deep level emission of ZnO nanoparticles deposited…
Nanocomposite films of Zinc Oxide and Silicon were grown by thermal evaporation technique using varying ratios of ZnO:Si in the starting material. Analysis reveal the role of ZnO and amorphous silicon interface in contributing to relatively…
ZnO nanoparticles (NP) of size less than around 20 nm inside a chamber exhibits complete reduction in their visible photoluminescence (PL) intensity when partial pressure of oxygen in the surrounding gaseous environment is decreased by…
Zinc oxide (ZnO) epitaxial thin films grown on c-sapphire substrates by pulsed laser deposition were investigated using angle and polarization-resolved photoluminescence spectroscopy. Side-emission spectra differed significantly from…
We report the low temperature growth of vertically aligned ZnO nanocolumns on Si substrates by using reactive radio frequency magnetron sputtering.High sputtering pressure combined with low substrate temperatures induce a pronounced self…
Controlling the growth of zinc oxide nanowires is necessary to optimize the performances of nanowire-based devices such as photovoltaic solar cells, nano-generators, or light-emitting diodes. In this view, we investigate the nucleation and…
In this letter, we study how coupling between AuNPs and ZnO thin films affects their emission properties. The emission intensity of ZnO thin films changes when Al2O3 spacer layer of different thickness are included in ZnO/Au films,…
As grown ZnO:Si nanocomposites of different compositional ratios were fabricated by thermal evaporation techniques. These films were subjected to post deposition annealing under high vacuum at a temperature of $\rm 250C^o$ for 90min. The…
As grown ZnO:Si nanocomposite films fabricated by thermal evaporation showed broad photoluiminescence (PL) spectra due to merging of four prominent peaks viz 370, 410, 470 and 520 nm. Investigations revealed the role of interface in…
Cr-doped ZnO films were fabricated by a new but feasible method, that is, annealing Cr-Zn layers deposited via DC magnetron sputtering in air. Microstructures of the films were investigated using X-ray diffraction, scanning electron…
ZnO films have been grown on gold (111) by electrodeposition using two different OH- sources, nitrate and peroxide, in order to obtain a comparative study between these films. The morphology, structural and optical characterization of the…
Porous silicon layers were embedded with ZnTe using the isothermal close space sublimation technique. The presence of ZnTe was demonstrated using cross-sectional energy dispersive spectroscopy maps. ZnTe embedded samples present intense…
Native and hydrogen-plasma induced shallow traps in hydrothermally grown ZnO crystals have been investigated by charge-based deep level transient spectroscopy (Q-DLTS), photoluminescence and cathodoluminescence microanalysis. The as-grown…
The structural, optical, morphological and nonlinear optical properties of Cu:ZnO spray-coated films are studied. The surface morphology of Cu:ZnO thin films turned out to be homogenous, crack free and well covered with pea-shaped grains.…
We recently reported on the first realization of ultraviolet photonic crystal laser based on zinc oxide [Appl. Phys. Lett. {\bf 85}, 3657 (2004)]. Here we present the details of structural design and its optimization. We develop a…
The surface effect and quantum confinement render nanomaterials the optoelectronic properties more susceptible to nonradiative processes than their bulk counterparts. These nonradiative processes usually contain a series of interwoven and…
Highly luminescent ZnO:Na nanocrystals of size ~2 nm were synthesized using a improved sol-lyophilization process. The surface analysis such as survey scan, core-level and valence band spectra of ZnO:Na nanocrystals were studied using x-ray…
We have characterized the growth of ZnO using sequential infiltration synthesis (SiS) on PS-b-PMMA block copolymers (BCP) of spherical and cylindrical sub-20nm morphologies and studied how the photoluminescence of these nanostructures…
Thin films of undoped zinc oxide (ZnO) and doped ZnO with copper were deposited on ceramic pellets made from abundant local clay materials with an addition of zirconia (ZrO2). The thin layers were prepared by a thermal method using an…
Zinc oxide thin films were deposited by ultrasonic spray pyrolysis technique using different Zinc precursors: Zinc acetate, Zinc nitrate and zinc chloride with different molarities. All deposited films were characterized by various…
Nanostructured Zinc oxide (ZnO) was synthesized via a ball milling for 10 hours using high energy planetary ball mill. Phase purity and homogeneity of all the samples have been investigated by X-ray diffraction (XRD) and Field Emission…