Related papers: Simple external cavity diode laser
We consider in this paper the angular deviation and diffraction efficiency of the reflection gratings in Littrow-configuration for applications of external cavity diode laser using the rigorous coupled-wave analysis method. We consider the…
We describe passive phase-locking architectures based on external-cavity setups to improve the brightness of diode laser bars. Volume Bragg gratings are used to stabilize the lase line. Numerical modelling and experimental results will be…
We report a simple tunable master-slave laser injection-lock scheme for atomic physics experiments. Seed light from an external cavity diode laser is injected into a high-power fiber-pigtailed diode laser via a fiber optic circulator.…
We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-P\'erot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a…
High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were…
Broad area laser diodes are attractive for the high optical power they can produce. Unfortunately, this high power normally comes at the cost of severely reduced spatial coherence since the wide area of the semiconductor wave-guide is…
We demonstrate phase and frequency stabilization of a diode laser at the thermal noise limit of a passive optical cavity. The system is compact and exploits a cavity design that reduces vibration sensitivity. The sub-Hz laser is…
We describe a simple method for measuring the residual fast phase noise of a cavity-stabilized laser using the cavity as a reference. The method is based on generating a beat note between the laser output and the strongly filtered light…
This paper presents a laser amplifier based on an antireflection coated laser diode. This laser amplifier operates without active temperature stabilisation at any wavelength within its gain profile without restrictions on the injection…
We propose a solid-state based superradiance laser which is almost insensitive to the cavity mirror vibration. Therefore, it can compete with the best frequency-stable local oscillators. The long coherence time and the large optical density…
The stabilization and manipulation of laser frequency by means of an external cavity are nearly ubiquitously used in fundamental research and laser applications. While most of the laser light transmits through the cavity, in the presence of…
We demonstrate a hybrid integrated and widely tunable diode laser with an intrinsic linewidth as narrow as 40 Hz, achieved with a single roundtrip through a low-loss feedback circuit that extends the cavity length to 0.5 meter on a chip.…
We propose a new type of laser resonator based on imaginary "energy-level splitting" (imaginary coupling, or quality factor Q splitting) in a pair of coupled microcavities. A particularly advantageous arrangement involves two microring…
It is well-known how to control the spatial output from a laser, with most solutions to date involving customised intra-cavity elements in the form of apertures, diffractive optics and free-form mirrors. These optical elements require…
We demonstrated a continuously tunable laser system by butt coupling a reflective semiconductor optical amplifier (RSOA) chip with a thin-film lithium niobate (TFLN) based multi-channel interference (MCI) cavity chip. This hybrid integrated…
We develop a simplified light source at 461 nm for laser cooling of Sr without frequency-doubling crystals but with blue laser diodes. An anti-reflection coated blue laser diode in an external cavity (Littrow) configuration provides an…
A non-resonant cavity to build up laser intensity is modeled, developed and tested. It can be used for overlapping multiple lasers of different wavelengths, increasing their intensities by over an order of magnitude while maintaining good…
To increase the spectral efficiency of coherent communication systems, lasers with ever-narrower linewidths are required as they enable higher-order modulation formats with lower bit-error rates. In particular, semiconductor lasers are a…
We demonstrate a straight-forward technique to measure the linewidth of a grating-stabilized diode laser system---known as an external cavity diode laser (ECDL)---by beating the output of two independent ECDLs in a Michelson interferometer,…
Optical cavities are frequently used in quantum technologies to enhance light matter interactions, with applications including single photon generation and entanglement of distant emitters. The Fabry-P\'{e}rot resonator is a popular choice…