Related papers: The BaBar Event Building and Level-3 Trigger Farm …
Since May 1999 the BABAR detector has been taking data at the PEP-II asymmetric electron-positron collider at the Stanford Linear Accelerator Center, California. This experiment requires a very large data sample and the PEP-II accelerator…
The BABAR detector operated successfully at the PEP-II asymmetric e+e- collider at the SLAC National Accelerator Laboratory from 1999 to 2008. This report covers upgrades, operation, and performance of the collider and the detector systems,…
As PEP-II is exceeding the original design luminosity, BaBar is currently upgrading its Level 1 Drift Chamber Trigger (DCT) to reduce the rate of background Level 1 triggers by more than 50% while preserving the high Level 1 trigger physics…
The BABAR detector, situated at the SLAC PEP-II asymmetric e^+e^- collider, has been recording data at energies on and around the Upsilon(4S) resonance since May 1999. In this paper, we briefly describe the PEP-II B Factory and the BABAR…
The PEP-II B Factory at SLAC has been in operation with the BABAR detector since the summer of 1999. The peak currents and luminosity steadily increased through the end of the 2000 run on October 31. By that time, 0.75 A of electrons (the…
In this report, the status of the PEP-II machine and the BaBar detector are presented. Performance will be presented as of the Lepton Photon Conference (August 1999) with subsequent performance levels footnoted as appropriate.
Resistive Plate Chambers (RPCs) were used for the instrumentation of the iron flux return of the BABAR detector as a muon system. Unfortunately the efficiency of the original RPCs degraded rapidly with time. Limited Streamer Tubes (LSTs)…
BABAR, the detector for the SLAC PEP-II asymmetric e+e- B Factory operating at the upsilon 4S resonance, was designed to allow comprehensive studies of CP-violation in B-meson decays. Charged particle tracks are measured in a multi-layer…
The BaBar experiment is characterized by extremely high luminosity, a complex detector, and a huge data volume, with increasing requirements each year. To fulfill these requirements a new control system has been designed and developed for…
We present recent results on leptonic B decays using data collected by the BaBar detector at the PEP-II asymmetric-energy e+e- collider at the Stanford Linear Accelerator Center. We report searches for the B -> tau nu decay, based on two…
Starting in 2022, the upgraded LHCb detector will collect data with a pure software trigger. In its first stage, reducing the rate from 30MHz to about 1MHz, GPUs are used to reconstruct and trigger on B and D meson topologies and high-pT…
Fast, efficient and accurate triggers are a critical requirement for modern high-energy physics experiments given the increasingly large quantities of data that they produce. The CEBAF Large Acceptance Spectrometer (CLAS12) employs a highly…
We present the results of searches for rare B meson decays. The measurements use all or part of a data sample of about 88 million $\Upsilon(4S)\to B{\bar B}$ decays collected between 1999 and 2002 with the \babar detector at the PEP-II…
The BaBar experiment at SLAC is in its fourth year of running. The data processing system has been continuously evolving to meet the challenges of higher luminosity running and the increasing bulk of data to re-process each year. To meet…
The ATLAS trigger has been used very successfully for the online event selection during the first part of the second LHC run (Run-2) in 2015/16 at a center-of-mass energy of 13 TeV. The trigger system is composed of a hardware Level-1…
We report recent measurements of rare charmless B decays performed by BaBar. The results are based on the final BaBar dataset of 424 fb^{-1} collected at the PEP-II $B$-factory based at the SLAC National Accelerator Laboratory.
The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We…
We present a review of recent results from BaBar experiment. BaBar detector has collected about 256 millions of $B\bar B$ events at PEP-II, the asymmetric $e^+e^-$ collider located at SLAC running at the $\Upsilon(4S)$ resonance. We have…
The DZERO experiment located at Fermilab has recently started RunII with an upgraded detector. The RunII physics program requires the Data Acquisition to readout the detector at a rate of 1 KHz. Events fragments, totaling 250 KB, are…
The ATLAS experiment relies on real-time hadronic jet reconstruction and $b$-tagging to record fully hadronic events containing $b$-jets. These algorithms require track reconstruction, which is computationally expensive and could overwhelm…