Related papers: Transverse Impedance Bench Measurements in NLC/JLC…
An analytical method is developed for calculating the geometric wakefield and impedances of an ultrarelativistic beam propagating on- and off-axis through an axially symmetric geometry with slowly varying circular cross-section, such as a…
Impedance matching between receive antenna and front-end significantly impacts channel capacity in wireless channels. To implement capacity-optimal matching, the receiver must know the antenna impedance. But oftentimes this impedance varies…
The vertical plane transverse emittance of accelerated electron bunches at the AWAKE experiment at CERN has been determined, using three different methods of data analysis. This is a proof-of-principle measurement using the existing AWAKE…
In superconducting linear accelerators (linacs), accurately monitoring beam dynamics is essential for minimizing beam losses and ensuring stable operations. However, destructive diagnostics must be avoided in superconducting sections to…
With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we…
We have developed novel impedance standards based on thin-film surface-mount-device (SMD) resistors. Due to the small dimensions of such resistors, the quantities determining their frequency dependence are very small and can be either…
Detectors based on pixels with timing capabilities are gaining increasing importance in the last years. Next-to-come high-energy physics experiments at colliders requires the use of time information in tracking, due to the increasing levels…
This paper focuses on robust transceiver design for throughput enhancement on the interference channel (IC), under imperfect channel state information (CSI). In this paper, two algorithms are proposed to improve the throughput of the…
We report the realization of a bonded-bridge on-chip superconducting coil and its use in impedance-matching a highly ohmic quantum dot (QD) to a $\rm{3~GHz}$ measurement setup. The coil, modeled as a lumped-element $LC$ resonator, is more…
Interference phenomena render tailoring propagation of electromagnetic waves by controlling phases of several scattering channels. Huygens element, being a representative example of this approach, allows enhancement of the scattering from…
The fast extraction kicker system is one of the most important accelerator components, whose inner structure will be the main source of the impedance in the RCS. It is necessary to understand the kicker impedance before its installation…
In recent years, a new method for experimental nonlinear modal analysis has been developed, which is based on the extended periodic motion concept. The method is well suited to experimentally obtain amplitude-dependent modal properties…
In this article we present an experimental study of microwave resonators made out of Josephson junctions. The junctions are embedded in a transmission line geometry so that they increase the inductance per length for the line. By comparing…
Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio-frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized…
A new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed…
Wireless sensor networks (WSNs) are vulnerable to eavesdropping as the sensor nodes (SNs) communicate over an open radio channel. Intelligent reflecting surface (IRS) technology can be leveraged for physical layer security in WSNs. In this…
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam…
We show that a rectangular metallic waveguide loaded with metamaterial elements consisting of electric-field coupled (ELC) resonators placed at the side walls can operate well below the cutoff frequency of the respective unloaded waveguide.…
We propose and demonstrate a spatial partition method for the high-frequency photo-response of superconducting devices correlated with inductive and resistive changes in microwave impedance. Using a laser scanning microscope, we show that…
We propose the design of an impedance matching acoustic bend in this article. The bending structure is composed of sub-wavelength unit cells with perforated plates and side pipes, whose mass density and bulk modulus can be tuned…