Related papers: Multi-Band Dipole And Multipole Wakefields In NLC …
Dielectric loaded waveguides (DLWs) driven by multicycle terahertz (THz) pulses hold great promise as compact linear accelerators (LINACs) due to their ability to sustain higher breakdown fields at THz frequencies compared to conventional…
The CLIC linear collider aims at accelerating multiple bunches of electrons and positrons and colliding them at a centre of mass energy of 3 TeV. These bunches will be accelerated through X-band linacs, operating at an accelerating…
Plasma wake-field acceleration experiments are performed at the SPARC LAB test facility by using a gas-filled capillary plasma source composed of a dielectric capillary. The electron can reach GeV energy in a few centimeters, with an…
An electron bunch passing through dielectric-lined waveguide generates $\check{C}$erenkov radiation that can result in high-peak axial electric field suitable for acceleration of a subsequent bunch. Axial field beyond Gigavolt-per-meter are…
An electron beam entering an accelerating cavity excites a wakefield. This wakefield can be decomposed into a series of multi-poles or modes. The dominant component of the transverse wakefield is dipole. This report summarizes the higher…
The Wake Field Monitor (WFM) system installed on the CLIC prototype accelerating structure in CERN Linear Accelerator for Research (CLEAR) has two channels for each horizontal/vertical plane, operating at different frequencies. When moving…
Dielectric lined waveguides are under extensive study as accelerating structures that can be excited by electron beams. Rectangular dielectric structures are used both in proof of principle experiments for new accelerating schemes and for…
Dielectric loaded structures are promising candidates for use in the structure wakefield acceleration (SWFA) technique, for both the collinear wakefield and the two-beam acceleration (CWA and TBA respectively) approaches, due to their low…
Flying-focus wakefields, which can propagate with a tunable velocity along the optical axis, are promising solutions to electron dephasing in laser-wakefield accelerators. This is accomplished by a combination of spatio-temporal couplings…
The injector linacs of the JLC/NLC comprise the e+ booster, the e- drive linac, the e+ booster, and the two prelinacs. These four systems together transport the two types of beams from the 80 MeV point at the end of their respective…
The vibration stability requirements for the Next Linear Collider (NLC) are far more stringent than for the previous generation of Colliders. To meet these goals, it is imperative that the effects of vibration on NLC Linac components from…
A scheme of laser wakefield acceleration, when a relatively rare and long bunch of non-relativistic or weakly-relativistic electrons is initially in front of the laser pulse, is suggested and considered. The motion of test electrons is…
Wakefield structures are critical for beam manipulation in free-electron lasers (FELs), particularly when serving as dechirpers, where beam-induced longitudinal wakefields compensate the energy chirp introduced during beam magnetic…
A linear accelerator structure, such as will be used in the linacs of the JLC/NLC collider, is composed of on the order of 100 cells. The cells are constructed as individual cups that are brazed together to form a structure. Fabrication…
Large detectors are often monitored at the channel level (drift time, collected charge, and hit maps), which validates hardware but not tracking performance. A wire-by-wire tracking efficiency diagnostic is presented for the Belle~II…
In many cases beam coupling impedances or wake fields are calculated with computer simulator such as CST Studio Suite, GdfidL Electromagnetic Field Simulator and so on. But evaluation with the stretched-wire method is still very useful by…
An analytical method is developed for calculating the geometric wakefield and impedances of an ultrarelativistic beam propagating on- and off-axis through an axially symmetric geometry with slowly varying circular cross-section, such as a…
RF processing studies of 1.8-m X-band (11.4 GHz) traveling wave structures at the Next Linear Collider Test Accelerator (NLCTA) have revealed breakdown-related damage at gradients lower than expected from earlier tests with standing wave…
In its normal mode of operation the Argonne Wakefield Accelerator Facility uses a high charge (10-100 nC), short pulse (3-5 psec) drive bunch to excite high-gradient accelerating fields in various slow-wave structures. To generate this…
Both longitudinal and transverse coupling impedance for some critical components need to be measured for accelerator design. The twin wires method is widely used to measure longitudinal and transverse impedance on the bench. A mode error is…