Related papers: Introduction of Modern Subsystems at the KEK Injec…
A 70 GeV Proton Synchrotron Extracted Beam Lines Control System is described. About 130 Magnet Dipoles and Quadrupoles, 20 Correction Magnets, 50 Beam Collimators, BPM equipment spread over 1 Km have to be controlled. The old System was…
With the new GSI High Current Injector, the beam pulse intensity will be increased by more than two orders of magnitude. The high beam power and the short stopping range at particle energies below 12 MeV/u can destroy accelerator components…
This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed…
First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System The roots of ATLAS (Argonne Tandem-Linac Accelerator System) date back to the early 1960s. Located at the Argonne National Laboratory, the accelerator has…
The EPICS based control system of the ISAC radioactive beam facility supervises several sub-systems, which are controlled by PLCs. Most of the devices are protected by non-trivial interlocks, which are implemented with ladder-logic…
The H- Accelerator consists of a 750 keV Cockcroft Walton preaccelerator and an Alvarez type 50 MeV linac. The accelerator has been in operation since 1961. Since 1981, it has been used as the injector for the Intense Pulsed Neutron Source…
The control system of the 1.5 MeV FEL injector is built on the base of ported EPICS. It uses low-cost hardware: personal computers with the processor Intel x86 and CAMAC equipment produced by our institute. At present time, the distributed…
The Source Development Lab (SDL) at BNL consists of a 230 MeV electron linac and a 10 m long wiggler for short wavelength Free Electronic Laser (FEL) development. The original control system [1] was based on the one in use at the National…
At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has…
External contractors are developing the local cooling and vacuum control systems for the Spallation Neutron Source (SNS) linac. Soon these systems will be integrated into the facility-wide controls system. Allen-Bradley Logix5000 series…
In NSC KIPT linac, a neutron source based on a subcritical assembly driven by a 100MeV/100kW electron linear accelerator is under design and development. The linear accelerator needs a new high current electron gun. In this paper, the…
In this paper, the program control unit of an embedded RISC processor is enhanced with a novel zero-overhead loop controller (ZOLC) supporting arbitrary loop structures with multiple-entry/exit nodes. The ZOLC has been incorporated to an…
A timing system provides high-precision signals to allow the controls over a variety of hardware and software components in the accelerator complex. This is guaranteed by the radio frequency (RF) and trigger signal synchronization for…
Neural networks are increasingly used in real-time systems, such as automated driving applications. This requires high-performance hardware with predictable timing behavior. State-of-the-art real-time hardware is limited in memory and…
HPC systems used for research run a wide variety of software and workflows. This software is often written or modified by users to meet the needs of their research projects, and rarely is built with security in mind. In this paper we…
In the context of the general consolidation of the CERN ISOLDE facility, a project has been started to upgrade the ISOLDE control system. We describe the new ISOLDE control system, emphasizing the systematic use of industrial components…
Modern PC workstations often provide more CPU power than required for most control applications. On the other hand, the screen space is always in short supply. One possible solution is to use more PCs, but in fact we need only more screens,…
he ESRF control system is in the process of being modernised. The present contrsystem is based on VME, 10 MHz Ethernet, OS9, Solaris, HP-UX, NFS/RPC, Motif and C. The new control system will be based on compact PCI, 100 MHz Ethernet, Linux,…
In October 2000, the third PCaPAC (PCs and Particle Accelerator Controls) workshop took place at DESY. This paper presents a summary of the workshop. The workshop reviewed existing and new PC-based accelerator control systems, from…
Modernizing the Fermilab accelerator control system is essential to future operations of the laboratory's accelerator complex. The existing control system has evolved over four decades and uses hardware that is no longer available and…