Related papers: A 1 W injection locked cw titanium:sapphire laser
Few-cycle lasers are essential for many research areas such as attosecond physics that promises to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the…
In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on…
The exceptionally low-energy isomeric transition in $^{229}$Th at around 148.4 nm offers a unique opportunity for coherent nuclear control and the realisation of a nuclear clock. Recent advances, most notably the incorporation of large…
The stabilization and manipulation of laser frequency by means of an external cavity are nearly ubiquitously used in fundamental research and laser applications. While most of the laser light transmits through the cavity, in the presence of…
We demonstrate a high-power narrow-linewidth ultraviolet (UV) laser system at 318.6 nm for direct 6S1/2-nP (n = 70 to 100) Rydberg excitation of cesium atoms. Based on commercial fiber lasers and efficient nonlinear frequency conversion…
We demonstrate an efficient procedure for terahertz-wave radiation generation by applying a nonlinear wavelength conversion approach using a mid-infrared pump source. We used a 3.3 {\mu}m dual-chirped optical parametric amplification source…
We report on the noise characterization of a free-running ring quantum cascade laser resonator emitting a single frequency mode around 7.7 $\mu$m. Using a gas cell filled with N$_2$O as a frequency-to-voltage discriminator, we measured the…
Photonic-crystal surface-emitting lasers (PCSELs) are capable of single-mode, high-power lasing over a large resonator area owing to two-dimensional resonance at a singularity point of the photonic band structure. Since the number of…
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in…
We present an innovative fiber laser system for both cesium and rubidium manipulation. The architecture is based on frequency conversion of two lasers at 1560 nm and 1878 nm. By taking advantage of existing fiber components at these…
We present an experimental implementation of a chirped mid-infrared (mid-IR) high-power laser source with variable center frequency between 4 THz to 30 THz and continuously tunable frequency sweep of up to 20 % within one pulse, with a…
We present a laser source delivering waveform-controlled 1.5-cycle pulses that can be focused to relativistic intensity at 1 kHz repetition rate. These pulses are generated by nonlinear compression of high-temporal-contrast sub-25\,fs…
We report on the generation of nanosecond mid-infrared pulses having frequency tunability, a narrow linewidth, and a high pulse energy. These pulses are obtained by frequency mixing between injection-seeded near-infrared pulses in potassium…
We obtained an optical-to-terahertz (THz) energy conversion efficiency of 0.5% using the tilted-pulse-front technique in lithium niobate at a cryogenically cooled temperature of 100 K pumped by amplified Ti:sapphire laser pulses with ~150…
The thermal lensing effects in the lasing crystal appear to be dominant when the pump laser focused on the lasing crystal which causes the local heating effect. The spatial refractive index variations observed if the crystal has non-uniform…
There are many researches reported in using Germanium in Silicon based lasers but acquiring this potential for a nanolaser may also be important for development of a CMOS compatible plasmon source. In this paper, a Ge/SiGe multiple quantum…
We demonstrate the use of a low power near-infrared laser illuminating the front facet of a quantum cascade laser (QCL) as an optical actuator for the coherent control of a mid-infrared frequency comb. We show that by appropriate current…
We report on the depletion and power amplification of the driving laser pulse in a strongly-driven laser wakefield accelerator. Simultaneous measurement of the transmitted pulse energy and temporal shape indicate an increase in peak power…
We report on high power operation of Er:Y2O3 ceramic laser at ~1.6 {\mu}m using low scattering loss, 0.25 at.% Er3+ doped ceramic sample fabricated in-house via co-precipitation process. The laser is in-band pumped by an Er, Yb fiber laser…
Gaseous ammonia has previously been demonstrated as a compelling gain medium for a quantum cascade laser pumped molecular laser (QPML), exhibiting good power efficiency but limited tunability. Here we explore the potential of the ammonia…