Related papers: Timing system of the Swiss Light Source

In the initial phase of the Swiss Light Source, four insertion devices will be installed. The control system for all the ID's follows an uniform concept to allow a rapid installation schedule, while at the same time allowing for a variety…

On December 15th the Swiss Light Source (SLS) produced a stored beam for the first time. This important milestone was achieved in a very tight time schedule. The fact that all major systems are controlled by Epics made this challenge…

The commissioning of the Swiss Light Source (SLS) started in Feb. 2000 with the Linac, continued in May 2000 with the booster synchrotron and by Dec. 2000 first light in the storage ring were produced. The first four beam lines had to be…

Event cameras can capture pixel-level illumination changes with very high temporal resolution and dynamic range. They have received increasing research interest due to their robustness to lighting conditions and motion blur. Two main…

This paper presents the design and implementation of a high-density, deterministic trigger distribution system tailored for the C-band photocathode electron gun test platform at the Southern Advanced Photon Source (SAPS). Implemented within…

A field programmable gate array (FPGA) based timing and trigger control system has been developed for the Dynamic Compression Sector (DCS) user facility located at the Advanced Photon Source (APS) at Argonne National Laboratory. The DCS is…

The Spallation Neutron Source (SNS) timing and Real Time Data Link (RTDL) systems are being designed and developed at Brookhaven National Laboratory (BNL), Los Alamos National Laboratory (LANL) and other SNS collaborating labs [1]. The…

The European Spallation Source (ESS) in Lund, Sweden is just entering the construction phase with 3 neutron instruments having started in its design concept phase in 2014. As a collaboration of 17 European countries the majority of hardware…

Event cameras are bio-inspired sensors providing significant advantages over standard cameras such as low latency, high temporal resolution, and high dynamic range. We propose a novel structured-light system using an event camera to tackle…

Event-driven sensors such as LiDAR and dynamic vision sensor (DVS) have found increased attention in high-resolution and high-speed applications. A lot of work has been conducted to enhance recognition accuracy. However, the essential topic…

Event-based vision sensors produce asynchronous event streams with high temporal resolution based on changes in the visual scene. The properties of these sensors allow for accurate and fast calculation of optical flow as events are…

The ATLAS Event Streaming Service (ESS) at the LHC is an approach to preprocess and deliver data for Event Service (ES) that has implemented a fine-grained approach for ATLAS event processing. The ESS allows one to asynchronously deliver…

An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A…

Fast and accurate depth sensing has long been a significant research challenge. Event camera, as a device that quickly responds to intensity changes, provides a new solution for structured light (SL) systems. In this paper, we introduce…

We demonstrate the feasibility of implementing a photon source with sub-Poissonian emission statistics through temporal multiplexing of a continuous wave heralded photon source in the optical communications wavelength range. We use the time…

We demonstrate a point-to-point clock synchronization protocol based on bidirectionally propagating photons generated in a single spontaneous parametric down-conversion (SPDC) source. Tight timing correlations between photon pairs are used…

Incorporating renewable energy sources (RESs) into manufacturing systems has been an active research area in order to address many challenges originating from the unpredictable nature of RESs such as photovoltaics.In the energy-aware…

Event-driven sensors, which produce data only when there is a change in the input signal, are increasingly used in applications that require low-latency and low-power real-time sensing, such as robotics and edge devices. To fully achieve…

In event-based sensing, many sensors independently and asynchronously emit events when there is a change in their input. Event-based sensing can present significant improvements in power efficiency when compared to traditional sampling,…

Event-based sensors (EBS) are a promising new technology for star tracking due to their low latency and power efficiency, but prior work has thus far been evaluated exclusively in simulation with simplified signal models. We propose a novel…