Related papers: The Timing Synchronization System at Jefferson Lab
Intense ultrashort pulse lasers are used for fs resolution pumpprobe experiments more and more at large scale facilities, such as free electron lasers (FEL). Measurement of the arrival time of the laser pulses and stabilization to the…
A novel single-sideband (SSB) time-modulated technique with 2-bit phase shifters is proposed. The timemodulated module is implemented by adding periodic phase modulation to 2-bit phase shifters, which is simpler without performance loss…
A 256-channel time-of-flight (TOF) electronics system has been developed for a beam line facility called "Back-n WNS" in China Spallation Neutron Source (CSNS). This paper shows the structure and performance of electronics system and the…
Modern automated factories increasingly run manufacturing procedures using a matrix of programmable machines, such as 3D printers, interconnected by a programmable transport system, such as a fleet of tabletop robots. To embed a…
Clock synchronization is a widely discussed topic in the engineering literature. Ensuring that individual clocks are closely aligned is important in network systems, since the correct timing of various events in a network is usually…
Time-Sensitive Networking (TSN) is a toolbox of technologies that enable deterministic communication over Ethernet. A key area has been TSN's time-aware traffic shaping (TAS), which supports stringent end-to-end latency and reliability…
Several ways to electronically synchronize different types of amplified femtosecond laser systems are presented, based on a single freely programmable electronics hardware: Arbitrary-detuning asynchronous optical sampling, as well as…
In this paper, we propose a hybrid clock synchronization architecture for a cascaded sensor network based on GPS time service and synchronous frame protocol. The sensor's upper-level unit is called sensor management unit (SMU) which…
Wall-clock convergence time and communication rounds are critical performance metrics in distributed learning with parameter-server setting. While synchronous methods converge fast but are not robust to stragglers; and asynchronous ones can…
The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab is investigating a significant energy upgrade utilizing Fixed-Field Alternating-gradient (FFA) recirculating arcs. This upgrade requires the design of complex…
In this manuscript, we propose a novel optimal Global Navigation Satellite System (GNSS) time tracking algorithm to collectively steer an ensemble consisting of synchronising miniature atomic clocks towards standard GNSS time. The…
Several modern accelerator facilities require the synchronization of equipment, which is distributed over large distances, down to the femto-second scale. This document describes the resulting problems, gives a basic description of concepts…
The SLAC mega-electron-volt (MeV) ultrafast electron diffraction (UED) instrument is a powerful "electron camera" for the study of time-resolved, ultrafast atomic & molecular dynamics in chemical and solid-state systems. The UED laser…
We propose to operate a superconducting transition edge sensor (TES) using a different type of biasing, in which the resistance of the TES is kept constant by means of feedback on the bias voltage and is independent of the incoming signal…
In this paper, an adaptive controller is designed for the synchronization of the trajectory of a robot with unknown kinematics and dynamics to that of the current human trajectory in the task space using the delayed human trajectory…
The LHC timing signals are broadcast to various destinations in the subsequent experiments. And all of them could be delayed to time in the ATLAS sub-detectors by using the Corde board and the RF2TTC module. The ATLAS BPTX detectors and…
The timing system of the Swiss Light Source is based on the event system concept of APS, Argonne [1]. However, for SLS the hardware was completely redesigned while preserving the software compatibility with the APS system. This gave us a…
This paper describes the cryogenic system for the Cryomodule Test Stand (CMTS) at the new Cryomodule Test Facility (CMTF) located at Fermilab. CMTS is designed for production testing of the 1.3 GHz and 3.9 GHz cryomodules to be used in the…
A Nd:YAG laser was used to simulate charged particle tracks at known positions in the CERES Time Projection Chamber at the CERN SPS. The system was primarily developed to study the response of the readout electronics and to calibrate the…
Temporal human action detection aims to identify and localize action segments within untrimmed videos, serving as a pivotal task in video understanding. Despite the progress achieved by prior architectures like CNN and Transformer models,…