Related papers: PLC Based Upgrades for the CAMD Linac and Storage …
This work describes the LLRF and control system in use for a novel accelerator structure developed for a compact design operating in C-band developed by SLAC, with collaboration from RadiaBeam and RadiaSoft. This design is a pulsed…
The SPring-8 control system provides data acquisition software called Poller/Collector for periodic data taking. Its polling scheme does not support taking data synchronized with an event, and simultaneity in the data from the different VME…
First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System The roots of ATLAS (Argonne Tandem-Linac Accelerator System) date back to the early 1960s. Located at the Argonne National Laboratory, the accelerator has…
In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of…
The first version of digital low level RF (DLLRF) for the Diamond Light Source storage ring and booster was developed with ALBA Synchrotron. Six systems have been built so far. Two of them are in routine operation controlling two normal…
Today's business organizations need access control systems that can handle complex, changing security requirements that go beyond what traditional methods can manage. Current approaches, such as Role-Based Access Control (RBAC),…
Advanced regulatory control (ARC), also known as advanced PID architectures, is a simple and robust way of controlling processes with changing and possibly conflicting constraints, where it previously was believed - at least in academia -…
The proposed Next Linear Collider (NLC) contains linac systems operating at L,S,C, and X band. This paper describes a wideband modular low-level RF (LLRF) system applicable for all NLC pulsed RF systems. High speed digital IF techniques are…
This paper describes a hierarchical control scheme for interconnected systems. The higher layer of the control structure is designed with robust Model Predictive Control (MPC) based on a reduced order dynamic model of the overall system and…
This study investigates the performance of cascade PID control architecture applied to an inverted pendulum on a cart system through both simulation and experimental implementation. A nonlinear model of the system was developed using…
There are six service buildings uniformly spaced along the perimeter of MI (Main Injector). A total of 18 LCW pumps were installed around the MI ring with 3 pumps per building. Approximately 8,000 GPM of LCW is required to cool magnets, bus…
Industrial Control Systems (ICSs) are complex interconnected systems used to manage process control within industrial environments, such as chemical processing plants and water treatment facilities. As the modern industrial environment…
This paper deals with the analysis and synthesis of a model predictive control (MPC) strategy used in connection with level control in conically shaped industrial liquid storage tanks. The MPC is based on a dynamical non-linear model…
As a part of the ongoing XIIth plan project titled "R&D activities for high energy proton linac based spallation neutron source", the work on physics design of various subsystems of the injector linac and accumulator ring has been taken up…
This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed…
The original LIGO suspension control system [1] used analog circuitry to implement the closed loop damping required for local control of each the suspended optics. Recent developments in analog to digital converters (ADC), digital to analog…
Upgradation of Programmable Logic Controller (PLC) software is quite common to accommodate evolving industrial requirements. Verifying the correctness of such upgrades remains a significant challenge. In this paper, we propose a…
A new data acquisition program for personal computers with Windows operating system has been built at Charles University van de Graaff laboratory. It allows fast data acquisition from CAMAC and other PC interface cards using interrupt or…
This paper compares the performance of a decentralized proportional-integral-derivative (PID) controller, a linear model predictive controller (LMPC), and a nonlinear model predictive controller (NMPC) applied to a quadruple tank system…
Resistive Plate Chambers (RPCs) were used for the instrumentation of the iron flux return of the BABAR detector as a muon system. Unfortunately the efficiency of the original RPCs degraded rapidly with time. Limited Streamer Tubes (LSTs)…