Related papers: A Prototype of Upgrading Bepc Control System

Cyber-physical systems (CPS) are composed of various embedded subsystems and require specialized software, firmware, and hardware to coordinate with the rest of the system. These multiple levels of integration expose attack surfaces which…

Novel use cases and verticals such as connected cars and human-robot cooperation in the areas of 5G and Tactile Internet can significantly benefit from the flexibility and reduced latency provided by Network Function Virtualization (NFV)…

With the increased attention to memristive-based in-memory analog computing (IMAC) architectures as an alternative for energy-hungry computer systems for machine learning applications, a tool that enables exploring their device- and…

This paper presents a simulation based control architecture that integrates Webots and Simulink for the development and testing of robotic systems. Using Webots for 3D physics based simulation and Simulink for control system design, real…

A complete dedicated electronics, from front-end to back-end, was developed to instrument a MIMAC prototype. A front end ASIC able to monitor 64 strips of pixels and to provide their individual "Time Over Threshold" information has been…

The ePIC collaboration is developing a multidetector system to explore the fundamental properties of the strong interaction at the future Electron-Ion Collider (EIC), to be built at Brookhaven National Laboratory. A key component of the…

Stacked intelligent metasurface (SIM), which consists of multiple layers of intelligent metasurfaces, is emerging as a promising solution for future wireless communication systems. In this timely context, we focus on broadcast…

The Internet of Things (IoT) necessitates robust access control mechanisms to secure a vast array of interconnected devices. Most of the existing IoT systems in practice use centralized solutions. We identify the problems in such solutions…

This paper presents the Adaptive Personalized Control System (APECS) architecture, a novel framework for human-in-the-loop control. An architecture is developed which defines appropriate constraints for the system objectives. A method for…

The control system of the 1.5 MeV FEL injector is built on the base of ported EPICS. It uses low-cost hardware: personal computers with the processor Intel x86 and CAMAC equipment produced by our institute. At present time, the distributed…

At least 25 kinds of detector-like devices need to be integrated in Phase I of the High Energy Photon Source (HEPS), and the work needs to be carefully planned to maximise productivity with highly limited human resources. After a systematic…

We present a methodology to learn explicit Model Predictive Control (eMPC) laws from sample data points with tunable complexity. The learning process is cast in a special Neural Network setting where the coefficients of two linear layers…

A Learning Model Predictive Controller (LMPC) for linear system in presented. The proposed controller is an extension of the LMPC [1] and it aims to decrease the computational burden. The control scheme is reference-free and is able to…

An autonomous adaptive MPC architecture is presented for control of heating, ventilation and air condition (HVAC) systems to maintain indoor temperature while reducing energy use. Although equipment use and occupant changes with time,…

High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system…

Reconfigurable photonic integrated circuits (PICs) can implement arbitrary operations and signal processing functionalities directly in the optical domain. Run-time configuration of these circuits requires an electronic control layer to…

This technical document describes the comparison of the EPICS PV gateway and a new solution based on relay of UDP packets using the UDP-HELPER switch feature, iptables and a C program. The solution can be applied on environments that…

This paper develops a Nearly Autonomous Management and Control (NAMAC) system for advanced reactors. The development process of NAMAC is characterized by a three layer-layer architecture: knowledge base, the Digital Twin (DT) developmental…

Metamaterials and metasurfaces have given possibilities for manipulating electromagnetic (EM) waves that in the past would have seemed impossible. The majority of metasurface designs are suitable for a particular frequency and angle of…

The combination of Integrated Sensing and Communication (ISAC) and Mobile Edge Computing (MEC) enables devices to simultaneously sense the environment and offload data to the base stations (BS) for intelligent processing, thereby reducing…