Related papers: Resonance Control Cooling System for a Proto-Type …

Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been developing a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for…

The US will be contributing to the HL-LHC upgrade at CERN with the fabrication and qualification of RFD crabbing cavities in the framework of the HL-LHC Accelerator Upgrade Project (AUP) managed by Fermilab. AUP received Critical Decision 3…

The Proof-of-Principle (POP) prototype of the Rf-Focused Drift tube (RFD) linac structure is currently under test at Linac Systems, after years of delay due to a variety of technical problems. A discussion of these technical problems and…

Developing high power density electronics requires effective and highly reliable cooling techniques with low thermal resistance and high heat removal capacity. Loop heat pipes (LHPs) are one kind of two-phase heat transfer device which can…

We consider the color spin locking (CSL) phase of two-flavor quark matter at zero temperature for nonlocal instantaneous, separable interactions. We employ a Lorentzian-type form factor allowing a parametric interpolation between the sharp…

We investigate laser cooling of an ensemble of atoms in an optical cavity. We demonstrate that when atomic dipoles are sychronized in the regime of steady-state superradiance, the motion of the atoms may be subject to a giant frictional…

A magnetic bunch compressor has been designed and is being commissioned for the APS linac to provide higher peak current for the LEUTL FEL. Of primary concern is control of emittance growth due to coherent synchrotron radiation (CSR). In…

The installation of the High-Luminosity Large Hadron Collider (HL-LHC) presents unprecedented challenges to experiments like the Compact Muon Solenoid (CMS) in terms of event rate, integrated luminosity and therefore radiation exposures. To…

Cavity cooling via quantum backaction force can extract thermal fluctuations from a mechanical resonator to reach the quantum ground state. Surface or bulk two-level-system (TLS) defects in a mechanical resonator can couple with the…

In view of a possible evolution of the CERN accelerator complex towards higher proton intensities, a 2.2 GeV H- linac with 4 MW beam power has been designed, for use in connection with an accumulator and compressor ring as proton driver of…

The neutron electric dipole moment (nEDM) experiment that is currently being developed at Los Alamos National Laboratory (LANL) will use ultracold neutrons (UCN) and Ramsey's method of separated oscillatory fields to search for a nEDM. In…

The use of high-quality factor resonators is of undoubted interest for high-precision measurements and for applications in quantum technologies. Novel types of microwave sensors can be realized by coupling a first resonator acting as a…

A multi-laboratory collaboration is studying the feasibility of building a muon collider, the first phase of which maybe a neutrino factory. The phase space occupied by the muons is very large and needs to be cooled several orders of…

Due to the sensitivity of the piezoelectric layer in surface acoustic wave (SAW) resonators to temperature, a method of achieving device stability as a function of temperature is required. This work presents the design, modeling and…

We consider feedback cooling in a cavityless levitated optomechanics setup, and we investigate the possibility to improve the feedback implementation. We apply optimal control theory to derive the optimal feedback signal both for quadratic…

The rapid cycling synchrotron (RCS) is part of China Spallation Neutron Source (CSNS). The RCS provides 1.6GeV protons with a repetition rate of 25Hz. The RF system in RCS is mainly composed of a ferrite loaded RF cavity, a high power…

Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently…

RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15kW RF power from the power source to the superconducting HWR cavity. According to the…

High linear voltage references circuitry are designed and implemented in TSMC 0.18$\mu$m CMOS technology. Previous research has proposed the use of MOS transistors operating in the weak inversion region to replace the bipolar devices in…

The coherence properties of optical emitters in crystals are crucial for quantum technologies and optical frequency metrology. Cooling to sub-kelvin temperatures can markedly enhance coherence, making it important to identify the parameters…