Related papers: Resonance Control Cooling System for a Proto-Type …

Considering the potential of thermostatically controlled loads (TCLs) to provide flexibility in demand response or load control, a semi-Markov model (SMM) for the ON/OFF controlled TCL is developed in this paper. This model makes full use…

Laser cooling of relativistic heavy ion beams of Li-like C$^{3+}$ and O$^{4+}$ is being in preparation at the experimental Cooler Storage Ring (CSRe). Recently, a preparatory experiment to test important prerequisites for laser cooling of…

We describe a framework of modeling a central chilled water plant (CCWP) that consists of an aggregate cooling coil, a number of heterogeneous chillers and cooling towers, and a chilled water-based thermal energy storage system. We improve…

Aluminum monochloride (AlCl) has been proposed as a promising candidate for laser cooling to ultracold temperatures, and recent spectroscopy results support this prediction. It is challenging to produce large numbers of AlCl molecules…

The COHERENT experiment located in Neutrino Alley at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory (ORNL), has made the world's first two measurements of coherent elastic neutrino-nucleus scattering (CEvNS), on CsI and…

We present a scheme for ground-state cooling of a mechanical resonator by simultaneously coupling it to a superconducting qubit and a cavity field. The Hamiltonian describing the hybrid system dynamics is systematically derived. The cooling…

Stochastic cooling, as the different cooling mechanism from electron cooling, is designed and constructed on CSRe (experimental Cooling Storage Ring) in HIRFL (Heavy Ion Research Facility in Lanzhou) at present. The beam extracted from CSRm…

We present a complete theory for laser cooling of a macroscopic radio-frequency LC electrical circuit by means of an optoelectromechanical system, consisting of an optical cavity dispersively coupled to a nanomechanical oscillator, which is…

RF power coupler is one of the key components in superconducting (SC) linac. It provides RF power to the SC cavity and interconnects different temperature layers (1.8K, 4.2K, 70K and 300K). TTF-III coupler is one of the most promising…

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to…

In frame of the development of a high resolution BPM system for the CLIC Main Linac we present the design of a cavity BPM prototype. It consists of a waveguide loaded dipole mode resonator and a monopole mode reference cavity, both…

The CCT (Coupled Cavity Tuning) code automates the RF calculations and sizing of RF cavities for the CCL (Coupled Cavity Linac) structures of APT. It is planned to extend the code to the CCDTL (Coupled Cavity Drift Tube Linac). The CCT code…

The position noise spectra of six drums on a single chip were measured on a single cooldown below 1.3 kelvin. Cryostat temperatures as low as 0.7 mK were achieved. The temperature dependence of the resonance frequency and linewidth of the…

The Proton Improvement Plan-II (PIP-II) is a superconducting linear accelerator being built at Fermilab that will provide 800 MeV proton beam for neutrino production. The linac consists of a total of twenty-three (23) cryomodules of five…

Residential Thermostatically Controlled Loads (TCLs) such as Air Conditioners (ACs), heat pumps, water heaters, and refrigerators have an enormous thermal storage potential for providing regulation reserve to the grid. In this paper, we…

Model predictive control (MPC) is a widely used technique for temperature set-point tracking and energy optimization of Heating Ventilation and Air Conditioning (HVAC) systems in buildings. Unfortunately, a nonlinear thermal building model…

We theoretically analyse the cooling dynamics of a high-Q mode of a mechanical resonator, when the structure is also an optical cavity and is coupled with a NV center. The NV center is driven by a laser and interacts with the cavity photon…

The RELICS (REactor neutrino LIquid xenon Coherent elastic Scattering) experiment aims to detect coherent elastic neutrino-nucleus scattering from reactor antineutrinos using a dual-phase xenon time projection chamber. To validate the…

The Proton Improvement Plan II (PIPII) is a superconducting linear accelerator being built at Fermilab that will provide 800 MeV proton beams for neutrino production. The Linac requires cooling at 80 K, 5 K, and 2 K temperatures, which will…

Uniform temperature distribution in Selective Laser Sintering (SLS) is essential for producing durable 3D prints. Achieving uniformity requires a laser power control system that minimises deviation of the printing temperatures from the…