Related papers: The NIF Integrated Timing System - Design and Perf…
We present a study on THz generation in lithium niobate pumped by a powerful and versatile Yb:CaF2 laser. The unique laser system delivers transform-limited pulses of variable duration (0.38-0.65 ps) with pulse energy of up to 15 mJ at a…
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide…
Synchronised laser oscillators are essential for probing the fastest processes in chemistry, materials science, and biology down to atto-second timescales. Tight synchronisation is also crucial at scientific facilities such as free-electron…
A time-of-flight system with a plastic scintillator coupled to photomultipliers is developed for the external target facility (ETF). This system can satisfy the requirement of an ultrahigh vacuum ($\sim 10^{-9}$ mbar), a high counting rate…
An upgraded high-energy nanosecond pulsed laser system tailored for optical particle diagnostics and manipulation capable of pulse energies beyond Joule-level is presented. In addition to the notable output energy increase, the laser system…
Recently we have reported on a compact microcontroller-based unit developed to accurately synchronise excimer laser pulses (Robert Mingesz et al, Fluct. Noise Lett. 11, 1240007 (2012), DOI: 10.1142/S021947751240007X, arXiv:1109.2632). We…
We present a framing integration ultrafast photography (FIP), which integrates the framing structure, codes a dynamic event by an inversed 4f system (I4F) and decodes regionally with high spatial resolution. In the experiment about…
The highly directional beams applied in millimeter wave (mmWave) cellular networks make it possible to achieve near interference-free (NIF) transmission under judiciously designed space-time user scheduling, where the power of…
In the initial phase of the Swiss Light Source, four insertion devices will be installed. The control system for all the ID's follows an uniform concept to allow a rapid installation schedule, while at the same time allowing for a variety…
We report on the 825-nm center wavelength, 9.17 mJ pulse energy Ti:sapphire-based femtosecond laser system simulation carried out by Lab2 tools in LabVIEW (National Instruments, Inc.). The design investigation and characterization of…
We describe how active feedback routines can be applied at limited repetition rate (5 Hz) to optimize high-power $>10$ TW) laser interactions with clustered gases. Optimization of x-ray production from an argon cluster jet, using a genetic…
Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m$^{-2}$ and implant more than 10$^{18}$ particles m$^{-2}$ in a few microseconds at a repetition…
Efficient simulation of the timing jitter in passively mode-locking lasers is key to their numerical investigation and optimization. We introduce a method based on the pulse-period fluctuation auto-correlation function and compare it…
Excitable photonic systems show promise for ultrafast analog computation, several orders of magnitude faster than biological neurons. Optically injected quantum dot lasers display several excitable mechanisms with dual state quantum lasers…
Intense ultrashort pulse lasers are used for fs resolution pumpprobe experiments more and more at large scale facilities, such as free electron lasers (FEL). Measurement of the arrival time of the laser pulses and stabilization to the…
Light source is indispensable component in on-chip system. Compared with hybrid or heterogeneous integrated laser, monolithically integrated laser is more suitable for high density photonic integrated circuit (PIC) since the capability of…
Synchronous laser-microwave networks delivering attosecond timing precision are highly desirable in many advanced applications, such as geodesy, very-long-baseline interferometry, high-precision navigation and multi-telescope arrays. In…
We have developed a new laser-based time calibration system for highly segmented scintillator counters like the MEG II pixelated Timing Counter (pTC), consisting of 512-centimeter scale scintillator counters read out by silicon…
The ICARUS liquid argon TPC detector is taking data on the Booster (BNB) and Main Injector (NuMI) Neutrino beam lines at Fermilab with a trigger system based on the scintillation light produced by charged particles in coincidence with the…
PROCESS is a reactor systems code - it assesses the engineering and economic viability of a hypothetical fusion power station using simple models of all parts of a reactor system. PROCESS allows the user to choose which constraints to…