Related papers: Integrating Externally Developed Systems For SNS L…

During the initial phase of operation, the linacs of the Next Linear Collider (NLC) will contain roughly 5000 X-Band accelerator structures that will accelerate beams of electrons and positrons to 250 GeV. These structures will nominally…

In NSC KIPT linac, a neutron source based on a subcritical assembly driven by a 100MeV/100kW electron linear accelerator is under design and development. The linear accelerator needs a new high current electron gun. In this paper, the…

Vortex-Induced Vibrations (VIVs) of cylindrical structures present significant challenges in various engineering applications, including marine risers, tall buildings, and renewable energy systems. Hence, it is vital to control…

On December 15th the Swiss Light Source (SLS) produced a stored beam for the first time. This important milestone was achieved in a very tight time schedule. The fact that all major systems are controlled by Epics made this challenge…

The Allen-Bradley ControlLogix line of pro-grammable logic controllers (PLCs) offers several in-terfaces: Ethernet, ControlNet, DeviceNet, RS-232 and others. The ControlLogix Ethernet interface module 1756-ENET uses EtherNet/IP, the…

The planned High Luminosity upgrade to the Large Hadron Collider at CERN aims to increase the instantaneous luminosity peak to about 7.5 x 10^{34} cm^{-2}s^{-1}. The ATLAS detector will be extensively re-designed to meet the challenges of…

We focus on the problem of managing a shared physical wireless sensor network where a single network infrastructure provider leases the physical resources of the networks to application providers to run/deploy specific…

The Proton Improvement Plan II (PIPII) is a superconducting linear accelerator being built at Fermilab that will provide 800 MeV proton beams for neutrino production. The Linac requires cooling at 80 K, 5 K, and 2 K temperatures, which will…

To reach carbon neutrality in the middle of this century, smart controls for building energy systems are urgently required. Model predictive control (MPC) demonstrates great potential in improving the performance of heating ventilation and…

In the initial phase of the Swiss Light Source, four insertion devices will be installed. The control system for all the ID's follows an uniform concept to allow a rapid installation schedule, while at the same time allowing for a variety…

Commercial buildings account for 17% of U.S. carbon emissions, with roughly half of that from Heating, Ventilation, and Air Conditioning (HVAC). HVAC devices form a complex thermodynamic system, and while Model Predictive Control and…

Networked control system (NCS) refer to a set of control loops that are closed over a communication network. In this article, the joint operation of control and networking for NCS is investigated wherein the network serves the…

Heating, Ventilation, and Air Conditioning (HVAC) systems are a major driver of energy consumption in commercial and residential buildings. Recent studies have shown that Deep Reinforcement Learning (DRL) algorithms can outperform…

A superconducting (SC) linac is expected to lead to outstanding discoveries in various scientific fields because its beam current is a few orders of magnitude larger than in a normal-conducting linac. However, the widespread use of SC linac…

The first eight years of operation of the Cold Neutron Chopper Spectrometer (CNCS) at the Spallation Neutron Source in Oak Ridge is being reviewed. The instrument has been part of the facility user program since 2009, and more than 250…

A muon collider (MC) would require a high-power proton driver to generate intense muon beams at the start of the accelerator chain. Like other high-power facilities, the driver would accumulate intense proton bunches via charge-exchange…

There are six service buildings uniformly spaced along the perimeter of MI (Main Injector). A total of 18 LCW pumps were installed around the MI ring with 3 pumps per building. Approximately 8,000 GPM of LCW is required to cool magnets, bus…

The main `bottleneck' limiting the beam power in circular machines is caused by space charge effects that produce beam instabilities. To increase maximally the beam power of a `proton driver', it is proposed to build a facility consisting…

Rather than creating yet another network controller which provides a framework in a specific (potentially new) programming language and runs as a monolithic application, in this paper we extend an existing operating system and leverage its…

Heating, ventilation, and air conditioning (HVAC) systems are well proved to be capable to provide operating reserve for power systems. As a type of large-capacity and energy-efficient HVAC system (up to 100 MW), district cooling system…