Related papers: FEL injector control system on the base of EPICS
This paper describes two research projects that develop new low-cost techniques for testing devices with multiple high-speed (2 to 5 Gbps) signals. Each project uses commercially available components to keep costs low, yet achieves…
Fermilab has traditionally not been an EPICS house; as such expertise in EPICS is limited and scattered. PIP-II will be using EPICS for its control system. When in operation, it will need to interface with the existing, modernized (see…
The LIGO Interferometer Sensing and Control System (ISC) is a large and highly distributed Multiple Input Multiple Output (MIMO) control system that is used to control the length and alignment degrees of freedom of the interferometers. The…
LCLS-II is currently in its commissioning phase at SLAC. It is an X-ray FEL driven by a CW superconducting LINAC. The beam injector plays a crucial role in the overall performance of the accelerator, and is critical to the final electron…
The Jefferson Lab (JLab) IR Demo Free Electron Laser (FEL) has completed commissioning and is initiating user service. The FEL - a high repetition rate, low extraction efficiency wiggler-driven optical cavity resonator - produces over 1 kW…
It is possible to attack a computer remotely through the front panel LEDs. Following on previous results that showed information leakage at optical wavelengths, now it seems practicable to inject information into a system as well. It is…
The CLIC Test Facility (CTF3) is an intermediate step to demonstrate the technical feasibility of the key concepts of the new RF power source for CLIC. CTF3 will use electron beams with an energy range adjustable from 170 MeV (3.5 A) to 380…
A low level radio frequency (LLRF) control system is designed and constructed at Peking University, which is for the DC-SRF photo injector operating at 2K. Besides with continuous wave (CW), the system is also reliable with pulsed RF and…
A compact low-level RF (LLRF) control system based on RF system-on-chip (RFSoC) technology has been designed for the Advanced Concept Compact Electron Linear-accelerator (ACCEL) program, which has challenging requirements in both RF…
Indoor localization systems based on Visible Light Communication (VLC) have shown promising advantages compared with systems based on other wireless technologies. In these systems, many VLC light-emitting diode (LED) anchors are employed in…
CEA Irfu Saclay is involved as partner in the ESS accelerator construction through different work-packages: controls for several RF test stands, for cryomodule demonstrators, for the RFQ coupler test and for the conditioning around 120…
This paper introduces a high-performance Soft-Core Processor based data acquisition system designed for handling Resistive Plate Chambers (RPCs). The DAQ consist of FPGA-based hardware equipped with Soft-Core Processor and embedded…
In the control system of the JAERI-KEK joint project (High Intensity Proton Accelerator Facility), it is planned to employ network-based controllers such as PLC's and measurement stations instead of using other field control networks, since…
The innermost part of the ATLAS experiment will be a pixel detector containing around 1750 individual detector modules. A detector control system (DCS) is required to handle thousands of I/O channels with varying characteristics. The main…
Advances in laser technology have driven discoveries in atomic, molecular, and optical (AMO) physics and emerging applications, from quantum computers with cold atoms or ions, to quantum networks with solid-state color centers. This…
he ESRF control system is in the process of being modernised. The present contrsystem is based on VME, 10 MHz Ethernet, OS9, Solaris, HP-UX, NFS/RPC, Motif and C. The new control system will be based on compact PCI, 100 MHz Ethernet, Linux,…
The Advanced Photon Source is now in its fifth year of routine beam production. The EPICS-based [1] control system has entered the phase in its life cycle where new control algorithms must be implemented under increasingly stringent…
Louisiana State University Center for Advanced Microstructures and Devices (CAMD) began a control system upgrade project in early 1997. At the time, the storage ring was controlled by a VAX/VMS system, primarily using CAMAC for I/O. The…
This paper presents a system consisting of the FPGA IP core, the simple network protocol and the Linux device driver, capable of efficient and reliable data transmission from a low resources FPGA chip to the Linux-based embedded computer…
The current status of the control system for a new high intensity proton accelerator, the JAERI-KEK Joint Project, is presented. The Phase 1 of the Joint-Project has been approved and recently started its construction at JAERI site at…