Related papers: Upgrade of the Photon Beamline Control System on t…
The synchrotron light source, a cutting-edge large-scale user facility, requires autonomous synchrotron beamline operations, a crucial technique that should enable experiments to be conducted automatically, reliably, and safely with minimum…
A 70 GeV Proton Synchrotron Extracted Beam Lines Control System is described. About 130 Magnet Dipoles and Quadrupoles, 20 Correction Magnets, 50 Beam Collimators, BPM equipment spread over 1 Km have to be controlled. The old System was…
On December 15th the Swiss Light Source (SLS) produced a stored beam for the first time. This important milestone was achieved in a very tight time schedule. The fact that all major systems are controlled by Epics made this challenge…
At the High Energy Photon Source (HEPS) where up to 90 beamlines can be provided in the future, minimisation of workload for individual beamlines and maximisation of knowledge about one beamline that can be applied to other beamlines is…
The Source Development Lab (SDL) at BNL consists of a 230 MeV electron linac and a 10 m long wiggler for short wavelength Free Electronic Laser (FEL) development. The original control system [1] was based on the one in use at the National…
Implementation and commissioning of the EPICS based control system for the ISAC radioactive beam facility was completed. The target ion source, mass separator, and low-energy beam-lines started beam production for experiments. In parallel,…
The Advanced Photon Source (APS) primary and backup injectors consist of two thermionic-cathode rf guns. These guns are being upgraded to provide improved performance, to improve ease of maintenance, and to reduce downtime required for…
The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…
The CERN fixed target experimental areas are composed of more than 8 km of beam lines with around 800 devices used to define and monitor the beam parameters. Each year more than 140 groups of users come to perform experiments in these…
A synchrotron radiation beamline in the photon energy range of 18 - 240 eV and an electron spectroscopy end station have been constructed at the 3 GeV Diamond Light Source storage ring. The instrument features a variable polarisation…
The control system of the VEPP-4 facility was designed more than fifteen years ago and based on the home-developed CAMAC-embedded minicomputers Odrenok [1]. Five years ago, all computers were connected via Ethernet network. This step…
Photolithography control system (PCS) is an extremely complex distributed control system, which is composed of dozens of networked microprocessors, hundreds of actuators, hundreds of thousands of sensors, and millions of lines of code.…
In 1995 a 9SDH-2 Pelletron from NEC was installed at IFUNAM (Instituto de Fisica, Universidad Nacional Autonoma de Mexico). Two beam lines have been operational since then and two new lines have been built. In order to perform the planned…
The new era of software signal processing has a large impact on radio astronomy instrumentation. Our design and implementation of a 32 antennae, 33 MHz, dual polarization, fully real-time software backend for the GMRT, using only…
Most of the devices in the SLAC control system are accessed via interface modules in ~450 CAMAC crates. Low-cost controllers in these crates communicate via a SLAC-proprietary bit-serial protocol with 77 satellite control computers…
Very compact 70 MeV pulse race-track microtron is under construction now. To acquire outputs of beam-current transformers on every orbit and pulses of high voltage and RF field a distributed multi-channel beam diagnostic system was…
Spectroscopic stimulated Raman scattering (SRS) imaging has become a useful tool finding a broad range of applications. Yet, wider adoption is hindered by the bulky and environmentally-sensitive solid-state optical parametric oscillator…
We consider different approaches to simulate a modern X-ray beamline. Several methodologies with increasing complexity are applied to discuss the relevant parameters that quantify the beamline performance. Parameters such as flux,…
The China Spallation Neutron Source (CSNS) accelerator uses H- stripping and phase space painting method of filling large ring acceptance with the linac beam of small emittance. The beam commissioning software system is the key part of CSNS…
The rapid cycling synchrotron (RCS) is part of China Spallation Neutron Source (CSNS). The RCS provides 1.6GeV protons with a repetition rate of 25Hz. The RF system in RCS is mainly composed of a ferrite loaded RF cavity, a high power…