Related papers: High Power Operations of LEDA

Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In…

A 29 W CW supercontinuum spanning from 1.06 to 1.67 um is generated in a short length of PCF with two zero dispersion wavelengths. The continuum has the highest spectral power density, greater than 50 mW/nm up to 1.4 um, reported to date.…

A 325MHz beta=0.14 superconducting half wave resonator(HWR) prototype has been developed at the Institute of High Energy Physics(IHEP), which can be applied in continuous wave (CW) high beam proton accelerators. In this paper, the…

A new regime of proton-driven plasma wakefield acceleration is discovered, in which the plasma nonlinearity increases the phase velocity of the excited wave compared to that of the protons. If the beam charge is much larger than minimally…

The RFQ of the project IPHI is a 8 meter long, high power, very precise tolerances (0.01 mm on 1 meter long for example) device to accelerate protons. This RFQ is similar to the RFQ of the LEDA project. So, we realize a thermal and…

We present the technical and engineering design of a medium energy (10 MeV) and high average power (1 MW) electron beam accelerator intended for irradiation treatment of high volume industrial and municipal wastewater. The accelerator uses…

We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole…

Continuous developments in Additive Manufacturing (AM) technologies are opening opportunities in novel machining, and improving design alternatives for modern particle accelerator components. One of the most critical, complex, and delicate…

A CW-compatible, pulsed H- superconducting linac "PIP-II" is being planned to upgrade Fermilab's injection complex. To validate the front-end concept, a test accelerator (The PIP-II Injector Test, formerly known as "PXIE") is under…

We have developed high-efficiency normal-conducting RF accelerating structures by combining H-mode resonator cavities and a transverse beam focusing by permanent-magnet quadrupoles (PMQ), for beam velocities in the range of a few percent of…

Radio frequency (RF) windows are historically a point where failure occurs in input-power couplers for accelerators. To understand more about the reliability of high power RF windows, lifetime testing was done on 700 MHz coaxial RF windows…

We consider acceleration light ions by the field of a traveling-wave in a helical waveguide. The frequency of the accelerating RF field f = 100 MHz, generator power P = 2 MW. Ion focusing is provided by a solenoidal magnetic field with the…

High power, relativistic electron beams from energy recovery linacs have great potential to realize new experimental paradigms for pioneering innovation in fundamental and applied research. A major design consideration for this new…

This report describes the design and proposal of a wireless link capable of broadcasting at 1 Gbps. For this application, isotropic antennas, 256 QAM modulation, and BER level less than 1e-5, without using error correction coding, were…

A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is…

Laser wakefield acceleration (LWFA) may enable the next generation of TeV-scale lepton colliders. Reaching such energies will likely require multiple LWFA stages to overcome limitations on the energy gain achievable in a single stage. The…

We report on new findings in a laser driven enhanced electron beam generation in the multi MeV energy range at moderate relativistic laser intensities and their applications. In our experiment, an intense sub-picosecond laser pulse…

A new Radio-frequency quadrupole (RFQ), which operates at 800 MHz high frequency and will enable to accelerate of the proton beam efficiently was designed at KAHVELab (Kandilli Detector, Accelerator and Instrumentation Laboratory) at…

The LIGHT (Linac for Image-Guided Hadron Therapy) project was initiated to develop a modular proton accelerator delivering beam with energies up to 230 MeV for cancer therapy. The machine consists of three different kinds of accelerating…

Tests were performed to pass a 100 MeV, 430 kWatt c.w. electron beam from the energy-recovery linac at the Jefferson Laboratory's FEL facility through a set of small apertures in a 127 mm long aluminum block. Beam transmission losses of 3…