Related papers: Development of the Low Energy Accelerator for Koma…

A 162.5 MHz, 2.1 MeV Radio Frequency Quadruples (RFQ) structure is being designed for the Injector Scheme II of China Accelerator Driver System (CADS) driver linac. The RFQ will operate at continuous wave (CW) mode as required. For the CW…

Presently large efforts are conducted towards the development of highly brilliant gamma beams via Compton back scattering of photons from a high-brilliance electron beam, either on the basis of a normal-conducting electron linac or a…

Multi-GeV-class laser plasma accelerating modules are key components of laser plasma accelerators, because they can be used as a booster of an upstream plasma or conventional injector or as modular acceleration sections of a multi-staged…

The paper reports the results of two-dimensional particle-in-cell simulations of proton beam acceleration at the interactions of a 130 fs laser pulse of intensity from the range of 10^21-10^23 W/cm^2, predicted for the Extreme Light…

Accelerator technology has advanced tremendously since the introduction of accelerators in the 1930s, and particle accelerators have become indispensable instruments in high energy physics (HEP) research to probe Nature at smaller and…

ARES (Accelerator Research Experiment at SINBAD) is a linear accelerator at the SINBAD (Short INnovative Bunches and Accelerators at DESY) facility at DESY. ARES was designed to combine reproducible beams from conventional RF-based…

The FCC (Future Circular Collider) study represents a vision for the next large project in high energy physics, comprising an 80-100 km tunnel that can house a future 100 TeV hadron collider. The study also includes a high luminosity e+e-…

Using the China Spallation Neutron Source (CSNS) linac as the injector, a 500 MeV proton synchrotron is proposed for multidisciplinary application, such as biology, material and proton therapy. The synchrotron will deliver proton beam with…

The Large Hadron electron Collider (LHeC) is a proposed future particle physics project colliding 60 GeV electrons from a six-pass recirculating energy-recovery linac (ERL) with 7 TeV protons stored in the LHC. The ERL technology allows for…

In current accelerators, numerous parameters and monitored values are to be adjusted and evaluated, respectively. In addition, fine adjustments are required to achieve the target performance. Therefore, the conventional…

SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ…

Self consistent analytic and numeric design for a set of electron guns with a high beams quality to be used in high power Ka-band klystrons are presented in this paper. The set of electron guns can be used in the high power Ka-band…

Taking advantage of the 0{\deg} synchronous phase, the KONUS ("Combined 0{\deg} Structure" translated from German "Kombinierte Null Grad Struktur") beam dynamics strategy enables long accelerating sections with lens-free slim drift tubes in…

CERN has recently launched the Future Circular Collider (FCC) study to deal with all aspects of an ambitious post-LHC possible programme. The emphasis of the study is on a 100 TeV proton collider to be housed in a 80-100 km new ring in the…

CLIC is a linear $e^+e^-$ ($\gamma\gamma$) collider project which uses a drive beam to accelerate the main beam. The drive beam provides RF power for each corresponding unit of the main linac through energy extracting RF structures. CLIC…

Within the framework of the European, project MYRTE (MYRRHA Research and Transmutation Endeavour) of the H2020 program, a 4-Rods RFQ (Radio Frequency Quadrupole) has been designed at 176.1 MHz RFQ for accelerating up to 4 mA protons in CW…

The Japanese National Institute of Information and Communications Technology (NICT) is currently developing a high-performance laser-communication terminal for CubeSats aiming at providing a high-datarate communication solution for LEO…

Main parameters of linac-ring type $phi$-factory proposed as the part of the Turkic Accelerator Complex (TAC) in the framework of ATAM Science Sity Project are discussed. Two sets of parameters, corresponding to E=130(260) MeV for electron…

The bulk irradiation of materials with 10-30 MeV protons promises to advance the study of radiation damage for fission and fusion power plants. Intermediate energy proton beams can now be dedicated to materials irradiation within…

Laser-plasma acceleration is an emerging technique for accelerating electrons to high energies over very short distances. The accelerated electron bunches have femtosecond duration, making them particularly relevant for applications such as…