Related papers: A New Linear Inductive Voltage Adder Driver for th…
The paper aims at demonstrating communication capabilities of IPT. For this data communication is performed between two modules using the concept of IPT. IPT was deemed to be the best solution to the system houses a multi parameter…
A new method of controllable injection to generate high quality electron bunches in the nonlinear blowout regime driven by electron beams is proposed and demonstrated using particle-in-cell simulations. Injection is facilitated by…
This paper describes the analysis and simulation performed on a three phase squirrel cage induction motor, fed by a Voltage Source Inverter (VSI), modulated using the space vector modulation scheme. The study mainly focused on analyzing the…
A LED flasher has been developed for TUNKA-133 EAS Cherenkov detector. A blue ultra bright InGaN LED is used as a light source in the flasher. The flasher's driver is based on a fast discharge of a small capacitor via a complementary pair…
In the initial phase of the Swiss Light Source, four insertion devices will be installed. The control system for all the ID's follows an uniform concept to allow a rapid installation schedule, while at the same time allowing for a variety…
Primary motivation for this work was the need to implement hardware accelerators for a newly proposed ANN structure called Auto Resonance Network (ARN) for robotic motion planning. ARN is an approximating feed-forward hierarchical and…
A fast-reading current integrator is developed for high time-resolution and low-noise ion beam diagnostics under both continuous-wave and pulsed operating conditions. The system combines a low-leakage transimpedance front-end with a hybrid…
For the Low Emittance Gun (LEG) project at Paul Scherrer Institute a stable and reliable high voltage pulsed generator was needed in order to study low emittance beams generation and transport. The system had to provide variable asymmetric…
ITER's large and powerful neutral beam injection system is based on an ion source utilizing a modular concept, where eight cylindrical drivers are attached to one common expansion and extraction region. In each driver, a plasma is sustained…
SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ…
This paper describes the concept of a primary electron beam facility at CERN, to be used for dark gauge force and light dark matter searches. The electron beam is produced in three stages: A Linac accelerates electrons from a photo-cathode…
This paper addresses the closed-loop ramp comparison current regulation in an induction machine fed by a pulse width modulated voltage source inverter. The regulator is implemented in a synchronous frame, serving as a foundation for an…
We present a setup for highly polarized proton beams using two parallel propagating laser pulses that have a carrier envelope phase difference of $\pi$. This mechanism is examined utilizing particle-in-cell simulations and compared to a…
Transformers are central to advances in artificial intelligence (AI), excelling in fields ranging from computer vision to natural language processing. Despite their success, their large parameter count and computational demands challenge…
This document describes the concept of a primary electron beam facility at CERN, to be used for dark gauge force and light dark matter searches. The electron beam is produced in three stages: A Linac accelerates electrons from a…
We demonstrate a silicon-based electron accelerator that uses laser optical near fields to both accelerate and confine electrons over extended distances. Two dielectric laser accelerator (DLA) designs were tested, each consisting of two…
Burn efficiency is a key for commercial feasibility of fusion power station for inertial fusion energy, while burn efficiency is usually lower than 30% in the central ignition scheme of inertial confinement fusion (ICF). A recent conceptual…
Laser-driven ion acceleration provides ultra-short, high-charge, low-emittance beams, which are desirable for a wide range of high-impact applications. Yet after decades of research, a significant increase in maximum ion energy is still…
X-Ray generations utilizing Thomson scattering fill in the gap that exists between conventional and synchrotron-based X-ray sources. They are expected to be more intense than X-ray tubes and more compact, accessible and less expensive than…
Electroaerodynamic propulsion, where force is produced through collisions between electrostatically accelerated ions and neutral air molecules, is an attractive alternative to propeller- and flapping wing-based methods for micro air vehicle…