Related papers: New Tasks and New Codes for RFQ Beam Simulation
Recent years have seen spectacular progress in the development of innovative acceleration methods that are not based on traditional RF accelerating structures. These novel developments are at the interface of laser, plasma and accelerator…
The design of the Linac Coherent Light Source assumes that a low-emittance, 1-nC, 10-ps beam will be available for injection into the 15-GeV linac. The proposed rf photocathode injector that will provide a 150-MeV beam with rms normalized…
This paper presents the final physics design of the Proton Improvement Plan-II (PIP-II) at Fermilab, focusing on the linear accelerator (Linac) and its beam transfer line. We address the challenges in longitudinal and transverse lattice…
The Linac Coherent Light Source (LCLS) project at SLAC uses a dense 15 GeV electron beam passing through a long undulator to generate extremely bright x-rays at 1.5 angstroms. The project requires electron bunches with a nominal peak…
The current program at Fermilab involves the construction of a new superconducting linear accelerator (LINAC) to replace the existing warm version. The new LINAC, together with other planned improvements, is in support of proton beam…
In the DAE{\delta}ALUS (Decay-At-rest Experiment for {\delta}CP studies At the Laboratory for Underground Science) project, high power H+2 cyclotron chains are proposed to efficiently provide proton beams with a kinetic energy of 800 MeV…
Laser-plasma acceleration is an emerging technique for accelerating electrons to high energies over very short distances. The accelerated electron bunches have femtosecond duration, making them particularly relevant for applications such as…
In this study, a low energy beam transport (LEBT) channel for the proton linac section of the Turkish Accelerator Center (TAC) has been designed by using TRAVEL code. Commonly used LEBT including two focusing solenoid magnets will transport…
A nuclear reactor based on MIT BEAVRS benchmark was used as a typical power generating Pressurized Water Reactor (PWR). The PARCS v3.2 nodal-diffusion core simulator was used as a full-core reactor physics solver to emulate the operation of…
The radiation pressure acceleration (RPA) of charged particles has been considered a challenging task in laser particle acceleration. Laser-driven proton/ion acceleration has attracted considerable interests due to its underlying physics…
The Spallation Neutron Source (SNS) is being designed for operation in 2004. The SNS is a 1 GeV machine consisting of a combination normal-conducting and super-conducting linac as well as a ring and target area. The linac front end is a…
We present a topology for linear accelerators (linacs) that permits larger degrees of freedom for the optimization of individual cavity shapes. The power is distributed to the cavities through a waveguide with periodic apertures that…
Particle accelerators play a pivotal role in advancing scientific research, yet optimizing beamline configurations to maximize particle transmission remains a labor-intensive task requiring expert intervention. In this work, we introduce…
Building a new generation of fission reactors in the United States presents many technical and regulatory challenges. One important challenge is the need to share and present results from new high-fidelity, high-performance simulations in…
The multi-host type DAQ front-end system is proposed and a prototype system is developed. In general, CAMAC/VME type ADC modules have a single trigger-input (or gate-input) port. In contrast, a prototype of a new system has multiple…
Quadrupole scans were used to characterize the LEDA RFQ beam. Experimental data were fit to computer simulation models for the rms beam size. The codes were found to be inadequate in accurately reproducing details of the wire scanner data.…
Front end of a CW linac of the Project X contains an H source, an RFQ, a medium energy transport line with the beam chopper, and a SC low-beta linac that accelerates H- from 2.5 MeV to 160 MeV. SC Single Spoke Resonators (SSR) will be used…
The Proof-of-Principle (POP) prototype of the Rf-Focused Drift tube (RFD) linac structure is currently under test at Linac Systems, after years of delay due to a variety of technical problems. A discussion of these technical problems and…
In this paper, the trajectory optimization problem for a multi-aerial base station (ABS) communication network is investigated. The objective is to find the trajectory of the ABSs so that the sum-rate of the users served by each ABS is…
Project-X is the proposed high intensity proton facility to be built at Fermilab, US. First stage of the Project-X consists of superconducting linac which will be operated in continuous wave (CW) mode to accelerate the beam from 2.5 MeV to…