Related papers: A Fast Switchyard for the TESLA FEL-Beam Using a S…

At the SASE-FEL user facilities FLASH and European XFEL, superconducting TESLA type cavities are used for acceleration of the driving electron bunches. The high achievable duty cycle allows for operating with long bunch trains, hence…

At the Free-Electron Laser in Hamburg (FLASH) and the European X-Ray Free-Electron Laser, superconducting TeV-energy superconducting linear accelerator (TESLA)-type cavities are used for the acceleration of electron bunches, generating…

FLASH and the European XFEL are SASE-FEL user facilities, at which superconducting TESLA cavities are operated in a pulsed mode to accelerate long bunch-trains. Several cavities are powered by one klystron. While the low-level rf system is…

We discuss the new layout of a cavity chain (superstructure) allowing, we hope, significant cost reduction of the RF system of both linacs of the TESLA linear collider. The proposed scheme increases the fill factor and thus makes an…

Recent experiments [1] have explored the use of a free-electron laser (FEL) as a buncher for a microwave two-beam accelerator, and the subsequent driving of a standing-wave rf output cavity. Here we present a deeper analysis of the…

In this article, a feasible switchyard design is proposed for the Shanghai soft x-ray free electron laser facility. In the proposed scheme, a switchyard is used to transport the electron beam to different undulator lines. Three-dimensional…

The operation of a Free Electron Laser (FEL) in the ultraviolet or in the X-ray regime requires the acceleration of electron bunches with an rms length of 25 to 50 micro meters. The wakefields generated by these sub picosecond bunches…

The lattice for the present design of the TESLA Linear Collider with integrated X-Ray Laser Facility is basically a FODO structure with constant beta-function. There are more than 800 individually powered superconducting quadrupoles to…

High-resolution longitudinal phase-space (LPS) diagnostics are essential for X-ray free-electron lasers and advanced accelerators. Conventional radio-frequency transverse deflecting structures (TDSs) provide direct femtosecond-scale LPS…

The proposed linear electron-positron collider TESLA is based on 1.3 GHz superconducting niobium cavities for particle acceleration. For a centre-of-mass energy of 500 GeV, an accelerating field of 23.4 MV/m is required which is reliably…

Free Electron Lasers (FEL) are commonly regarded as the potential key application of laser wakefield accelerators (LWFA). It has been found that electron bunches exiting from state-of-the-art LWFAs exhibit a normalized 6-dimensional beam…

X-ray free electron lasers will be constructed in this decade, both at SLAC in the form of the so-called Linac Coherent Light Source as well as at DESY, where the so-called TESLA XFEL laboratory uses techniques developed for the design of…

For the superconducting linear collider TESLA a multi purpose detector has been designed. This detector is optimised for the important physics processes expected at a next generation linear collider up to around 1 TeV and is designed for…

A new cavity-chain layout has been proposed for the main linac of the TESLA linear collider. This superstructure-layout is based upon four 7-cell superconducting standing-wave cavities, coupled by short beam pipes. The main advantages of…

Recently the generation of electron bunch trains with sub-picosecond time structure has been experimentally demonstrated at the A0 photoinjector of Fermilab using a transverse-longitudinal phase-space exchange beamline. The temporal profile…

Due to their ultra-short duration and peak currents in the kA range, laser-wakefield accelerated electron bunches are promising drivers for ultrafast X-ray generation in compact free-electron-lasers (FELs), Thomson-scattering or betatron…

The X-ray free-electron laser oscillator (XFELO) has recently been reconsidered a promising candidate for producing high-brightness, fully coherent pulses in the hard X-ray regime. This letter proposes a gain-guided XFELO scheme, avoiding…

The conceptional design of the proposed linear electron-positron collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with an accelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. The design goal for…

This paper describes an effective frequency doubler scheme for SASE free electron lasers. It consists of an undulator tuned to the first harmonic, a dispersion section, and a tapered undulator tuned to the second harmonic. The first stage…

We have fabricated multilayer readout wiring Transition Edge Sensors (TES), which enable us to realize both large effective area and high-energy resolution for future X-ray astrophysical missions, such as DIOS. By sandwiching a SiO2…