Related papers: Acceleration for the mu-Storage Ring Neutrino Sour…

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the…

We discuss possible acceleration scenarios and methods for a mu+ mu- collider. The accelerator must take the beams from ~100 MeV to 2 TeV within the muon lifetime (2.2 x 10**(-6) E(mu)/m(mu) uS), while compressing bunches of 10**(12) muons…

We are exploring the feasibility of a neutrino factory based on a muon storage ring. In this, beams of nu_mu and nubar_e arise from the decay of mu- particles (or alternatively, nubar_mu and nu_e from mu+). The muons come from the decay of…

A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle…

A 4600 Hz fast ramping synchrotron is explored as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel…

Muon-based accelerators have the potential to enable facilities at both the Intensity and the Energy Frontiers. Muon storage rings can serve as high precision neutrino sources, and a muon collider is an ideal technology for a TeV or…

Experimental and theoretical activities are underway at CERN with the aim of examining the feasibility of a very-high-flux neutrino source. In the present scheme, a high-power proton beam (some 4 MW) bombards a target where pions are…

A 4600 Hz fast ramping synchrotron is studied as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel…

The first acceleration stage for this muon collider scenario includes twenty passes through a single two GeV Linac. Teardrop shaped arcs of 1.8 Tesla fixed field magnets are used at each end of the Linac. This dogbone geometry minimizes…

Two 2200m radius hybrid rings of fixed superconducting magnets and iron magnets ramping at 200 Hz and 330 Hz are used to accelerate muons. Muons are given 25 GeV of RF energy per orbit. Acceleration is from 250 GeV/c to 2400 GeV/c and…

A muon collider as well as a neutrino factory requires a large number of muons with a kinetic energy of 50GeV or more. Muon survival demands a high gradient linac. The large transverse and longitudinal emittance of the muon beam coming from…

Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($\mu^+$) and two electrons, are generated from $\mu^+$'s through the electron…

Muon acceleration from 30 to 750 GeV in 72 orbits using two rings in the 1000m radius Tevatron tunnel is explored. The first ring ramps at 400 Hz and accelerates muons from 30 to 400 GeV in 28 orbits using 14 GV of 1.3 GHz superconducting…

The (International Design Report) IDR neutrino factory scenario for capture, bunching, phase-energy rotation and initial cooling of micro's produced from a proton source target is explored. It requires a drift section from the target, a…

Many models of ultra-high energy cosmic-ray production involve acceleration in linear accelerators located in Gamma-Ray Bursts magnetars, or other sources. These source models require very high accelerating gradients, $10^{13}$ keV/cm, with…

nuSTORM (Neutrinos from STORed Muons) is a proposed storage ring facility to deliver beams of muon antineutrinos and electron neutrinos from positive muon decays (muon neutrinos and electron antineutrinos from negative muon decays), with a…

Muon storage rings have been proposed for use as sources of intense high-energy neutrino beams and as the basis for muon colliders. Phase-space compression (cooling) of the muon beam prior to acceleration and storage is needed to optimise…

A muon collider (MC) would require a high-power proton driver to generate intense muon beams at the start of the accelerator chain. Like other high-power facilities, the driver would accumulate intense proton bunches via charge-exchange…

A new scheme to produce very low emittance muon beams using a positron beam of about 45~GeV interacting on electrons on target is presented. One of the innovative topics to be investigated is the behaviour of the positron beam stored in a…

The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy…