Related papers: Design Studies for a High Current Bunching System …

Compact, reliable and little consuming accelerators are required for the treatment of tumours with ions. TERA proposes the "cyclinac", composed of a high-frequency, fast-cycling linac which boosts the energy of the particles previously…

The plasma wakefield amplitudes which could be achieved via the modulation of a long proton bunch are investigated. We find that in the limit of long bunches compared to the plasma wavelength, the strength of the accelerating fields is…

Studies were made into the arise and an evolution of the beam breakup (BBU) instability in a rectangular dielectric resonator under excitation by a sequence of relativistic electron bunches. The dielectric resonator is a metal rectangular…

The concept of complex frequency has been recently introduced on the IEEE Transactions on Power Systems to study bus voltage variations in magnitude and frequency and their link with complex power injections of a power system. In this…

Beam tail effect of multi-bunches will influence the electron beam performances in high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single and multi-pulse fed-in of performance-enhanced…

Dipole wakefields in NLC (Next Linear Collider) structures have been measured with ASSET [1] and well predicted by a circuit model [2]. However, the experimental technique is both time-consuming and expensive. Here, we report on kick factor…

The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies: 380 GeV, 1.5 TeV, and 3 TeV. Its aim is to explore the energy…

We present the first experimental realization of a widely frequency tunable, non-degenerate three-wave mixing device for quantum signals at GHz frequency. It is based on a new superconducting building-block consisting of a ring of four…

PIP-II beam transfer line (BTL) to transport the beam from PIP-II Linac to the Booster ring at Fermilab. One crucial aspect of the BTL design involved the implementation of collimators. These collimators play a vital role in removing large…

We present the results of multi-objective genetic algorithm optimizations of a potential single shot ultra fast electron diffraction beamline utilizing a 225 kV dc gun with a novel cryocooled photocathode system and buncher cavity.…

The high peak current required in free-electron lasers (FELs) is realized by longitudinal compression of the electron bunches to sub-picosecond length. In this paper, a frequency-domain diagnostic method is described that is capable of…

Using a tight-binding mode-space NEGF technique, we explore the essential physics, design and performance potential of the III-V core-shell (CS) nanowire (NW) heterojunction TFET. The CS TFET line-tunneling current increases significantly…

Three-dimensional integration technologies such as flip-chip bonding are a key prerequisite to realize large-scale superconducting quantum processors. Modular architectures, in which circuit elements are spread over multiple chips, can…

We present a systematic study of the phase-coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching DC SQUID method.…

Shot noise measurements were recently exploited to measure the charge of the quasiparticles in the Fractional Quantum Hall (FQH) regime. For fractional filling factors nu=1/3 and 2/5 of the first Landau level, fractional charges q=e/3 and…

Seeded Free Electron Lasers (FELs) demonstrate a good performance and are successfully used in different user experiments in extreme ultraviolet and soft X-ray regimes. In this paper a simple modification of the seeding scenario is proposed…

We present a novel concept for the generation of gigahertz repetition rate high brightness electron bunches. A custom design 100 kV thermionic gun provides a continuous electron beam, with the current determined by the filament size and…

Studies of the electron beam dynamics for the 4GLS design are presented. 4GLS will provide three different electron bunch trains to a variety of user synchrotron sources. The 1 kHz XUV-FEL and 100 mA High Average Current branches share a…

In order to update the beam power from 100 kW to 250 kW in China spallation neutron source (CSNS) Phase II, one of the important measures is to replace the 80 meters long beam transport line between the present 80 MeV linac injector and the…

Theoretical predictions are made for the current-voltage characteristics of two-dimensional heterojunction interlayer tunneling field-effect transistors (Thin-TFETs), focusing on the magnitude of the current that is achievable in such…