Related papers: Design Studies for a High Current Bunching System …

Compensation of multi-bunch beam loading is of great importance in the main linac of the Compact Linear Collider (CLIC). The bunch-to-bunch energy variation has to stay below 1 part in 1000. In CLIC, the RF power is obtained by decelerating…

We present results of an experiment showing the first successful demonstration of a cascaded micro-bunching scheme. Two modulator-chicane pre-bunchers arranged in series and a high power mid-IR laser seed are used to modulate a 52 MeV…

The cw CCL being designed for the Accelerator Production of Tritium (APT) project accelerates protons from 96MeV to 211MeV. It consists of 99 segments each containing up to seven accelerating cavities. Segments are coupled by intersegment…

SRF CW accelerator constructed for Coherent electron Cooling (CeC) Proof-of-principle (POP) experiment at Brookhaven National Laboratory has frequently demonstrated record parameters using 1.5 nC 350 ps long electron bunches, typically…

The ISIS buncher system at TRIUMF operates at frequencies of 23MHz, 46MHz, and 4.6MHz. The 23MHz and 46MHz signals drive two buncher cavities, while the 4.6MHz signal drives the 5:1 selector. The previous analog-digital hybrid system has…

We investigate through beam dynamics simulations the potential of a hybrid layout mixing RF and THz technologies to be a compact X-ray source based on Inverse Compton Scattering (ICS), delivering few femtoseconds to sub-femtosecond pulses.…

Attosecond electron beams are essential for investigating ultrafast structural and electronic dynamics in matter with atomic-scale resolution. We propose a novel method that enables robust attosecond-level electron bunch compression. This…

Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of…

The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the…

The Compressed Baryonic Matter (CBM) experiment is one of the major scientific spectrometers of the future Facility for Antiproton and Ion Research (FAIR) in Darmstadt. As one of the core sub-systems in CBM experiment for charged hadron…

This paper outlines the RF design of the CLIC (Compact Linear Collider) 30 GHz main linac accelerating structure and gives the resulting longitudinal and transverse mode properties. The critical requirement for multibunch operation, that…

With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we…

A means for non-invasive measurement of transverse and longitudinal characteristics of bunched beams in synchrotrons has been developed based on high sensitivity slotted waveguide pickups. The pickups allow for bandwidths exceeding hundreds…

The International Muon Collider Collaboration (IMCC) is engaged in a design study for a future facility intended to collide muons. Subsequent to the initial linear acceleration, the counter-rotating muons and anti-muons are accelerated in a…

High temperature superconducting (HTS) dynamos are promising devices that can inject large DC currents into the winding of superconducting machines or magnets in a contactless way. Thanks to this, troublesome brushes in HTS machines or…

The $WW$ production is the primary channel to directly probe the triple gauge couplings. We first analyze the $e^+ e^- \rightarrow W^+ W^-$ process at the future lepton collider, China's proposed Circular Electron-Positron Collider (CEPC).…

Triple heterojunction (THJ) TFETs have been proposed to resolve the low ON-current challenge of TFETs. However, the design space for THJ-TFETs is limited by fabrication challenges with respect to device dimensions and material interfaces.…

To mitigate the BBU instability and improve characteristics of accelerated bunches in Dielectric Wakefield Accelerator one can be used the isotropic plasma filling of the transport channel. Here we present the results of analytical and…

Interest in highly-compressed electron beams has been increasing in recent times, driven by the study of non-linear and even non-perturbative aspects of QED [2]. The FACET-II [7] facility at SLAC is currently (at the time of writing) being…

For the HLS-II bunch current measurement system, in order to obtain the absolute value of bunch current, the calibration factor should be determined by using DCCT. At the HLS storage ring, the stretch effect of bunch length is observed and…